Questions? Call us at (262) 218-2915

Sign Regulations in Oklahoma City, Oklahoma

Oklahoma City, Oklahoma has specific sign regulations covering 83 sign types across 22 zoning districts. Regulated sign types include Ground Sign (Freestanding) – R Sign District – Nonresidential & MF, Pole Sign (Freestanding) – R Sign District – Nonresidential & MF, Subdivision Entry Monument Sign – Each Side of Entry Street. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: February 10, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Oklahoma City, Oklahoma

Sample Sign Requirements in Oklahoma City

Sign TypeMax HeightMax AreaSetback
Ground Sign (Freestanding) – R Sign District – Nonresidential & MFBy street type: 5' neighborhood; 6' main; 8' connector; 8' downtown; 8' industrial; 12' minor arterial; 12' major arterial; 12' highway.Nonresidential: 1 sf per 2 lf of frontage (both <100' and >100'), up to street-type caps (15 sf neighborhood; 25 sf main; 35 sf connector; 35 sf downtown; 20 sf industrial; 65 sf minor arterial; 100 sf major arterial; 100 sf highway). MF: 5–12 units: 8 sf; 13–29 units: 24 sf; ≥30 units: 1 sf per 2 lf of frontage, up to 100 sf.Must comply with building/zoning setbacks for structures; no specific numeric setback in table beyond sight triangle and parking prohibitions. Highway-abutting note does not alter setback.
Pole Sign (Freestanding) – R Sign District – Nonresidential & MFBy street type: 5' neighborhood; 6' main; 7' connector; 7' downtown; 7' industrial; 11' minor arterial; 11' major arterial; 11' highway.Nonresidential: 0.9 sf per 2 lf of frontage (both <100' and >100'), up to street-type caps (14 sf neighborhood; 23 sf main; 32 sf connector; 32 sf downtown; 18 sf industrial; 60 sf minor arterial; 90 sf major arterial; 90 sf highway). MF: 5–12 units: 7 sf; 13–29 units: 22 sf; ≥30 units: 0.9 sf per 2 lf of frontage, up to 90 sf.No explicit numeric setback beyond general building setback and sight-distance requirements; must clear required sight triangles (§59-16103.F).
Subdivision Entry Monument Sign – Each Side of Entry Street10' for each monument sign on each side of the entry street.64 sf per sign face on each side of entry street.Minimum setback: none (Table 59-16107.4), subject to other Code provisions (e.g., sight triangle, ROW rules).

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Oklahoma CityFull Coverage

Sign Types Covered

83

  • Ground Sign (Freestanding) – R Sign District – Nonresidential & MF
  • Pole Sign (Freestanding) – R Sign District – Nonresidential & MF
  • Subdivision Entry Monument Sign – Each Side of Entry Street
  • Subdivision Entry Monument Sign – Median
  • +2 more types

Zoning Districts

22

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Oklahoma City

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Oklahoma City, the height limit for Flag on Pole – C in the O-1 Limited Office District (O-1) and other zoning districts is 35' flagpole height max. The height limit for Wall Sign – I (C-2, C-3, C-4, C-HC, TP, I-1, I-2, I-3) in the C-2 Shopping Center District (C-2) and other zoning districts is 6' max sign height for wall signs in I column (Table 59-16108.1). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Oklahoma City require a permit. From the submission notes on this page: All applicable provisions of this Article (including the sign district standards in effect when the master site plan is approved) apply to any master sign plan for a PUD or SPUD to the extent not inconsistent with the approved plan (§59-16102.D.3). Run a code check for an exact address to see the permit requirements for that zone.

Oklahoma City's sign code covers 83 sign types, including Ground Sign (Freestanding) – R Sign District – Nonresidential & MF, Pole Sign (Freestanding) – R Sign District – Nonresidential & MF, Subdivision Entry Monument Sign – Each Side of Entry Street, and Subdivision Entry Monument Sign – Median. Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Ghost signs in the BC district may be restored or replaced within the limits of the existing sign subject to a Certificate of Approval and do not require a sign permit; they are not counted toward maximum wall sign area (§59-16108.B.6.b–c). The full list is on this page.

In Oklahoma City, Flag on Pole – C in the O-1 Limited Office District (O-1) and other zoning districts must be set back 5' from all property lines. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Oklahoma City's sign ordinance that cover digital, changing, or flashing signs: No sign or part of a sign shall move (§59-16103.J), except as specifically allowed for Electronic Message Displays under EMD operational standards. Flashing or intermittent lighting is prohibited on signs, other than permitted electronic message displays (§59-16105.A.4). EMD Level 2 and Level 3 displays are not allowed in zoning districts or sign types where Tables 59-16105.3 and 59-16107/16108/16110 indicate they are not permitted (general prohibition by matrix). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Oklahoma City Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Oklahoma City, Oklahoma, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Oklahoma City, Oklahoma Sign Rules at a Glance

Oklahoma City, Oklahoma regulates 83 sign types across 22 zoning districts. Temporary Subdivision Signs - C (Commercial Subdivisions) in the O-1 Limited Office District (O-1) and other zoning districts are capped at 16' tall and 300 sq ft per sign. Most commercial signs in Oklahoma City require a permit.

Detailed Sign Ordinance Requirements for Oklahoma City, Oklahoma

Sign Rules by Zoning District in Oklahoma City (22 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
AA Agricultural District (AA); RA2 Single-Family Two-Acre Rural Residential District (RA2); RA Single-Family One-Acre Rural Residential District (RA); R-1 Single-Family Residential District (R-1); R-1ZL Single-Family Residential Zero Lot Line District (R-1ZL); R-2 Medium-Low Density Residential District (R-2); R-3 Medium Density Residential District (R-3); R-3M Medium Density Multiple-Family Residential District (R-3M); R-4M Medium-High Density Multiple-Family Residential District (R-4M); R-4 General Residential District (R-4); R-MH-1 Manufactured (Mobile) Home Subdivision District (R-MH-1); R-MH-2 Manufactured (Mobile) Home Park District (R-MH-2); NC Neighborhood Conservation District – Tracts 1, 2 and 3 (NC Tracts 1, 2, 3)14If used as roof sign: maximum 30' from roof surface to top of balloon and must not exceed maximum allowed building height from grade in the zoning district.300 sf max per sign.Not listed
O-1 Limited Office District (O-1); O-2 General Office District (O-2) – parcels <12,000 sf (C-Low); RC Rural Commercial District (RC); NB Neighborhood Business District (NB); C-1 Neighborhood Commercial District (C-1); C-CBD Central Business District (C-CBD); NC Neighborhood Conservation District – Tract 4 (NC Tract 4)1135' flagpole height max.300 sf per sign.Not listed
C-2 Shopping Center District (C-2); C-3 Community Commercial District (C-3); C-4 General Commercial District (C-4); C-HC Highway Commercial District (C-HC); TP Technology Park District (TP); I-1 Light Industrial District (I-1); I-2 Moderate Industrial District (I-2); I-3 Heavy Industrial District (I-3)1435' pole height.300 sf.Not listed
C-CBD Central Business District (C-CBD); Downtown Business District (DBD); Downtown Design District 1 (DTD-1); Downtown Design District 2 (DTD-2)1135'Within wall sign allocation; no special numeric cap for C-CBD apart from wall sign max; BC frame 200 sf, water tower 100 sf if historic evidence. Roof signs only on structures >7 stories.Not listed
Bricktown Core Development District (BC)1135'Frame sign: 200 sf; water tower signs: 100 sf each (two faces allowed on same tower).Not listed
Historic Preservation District (HP); Historic Landmark District (HL)1Not listedSee R projecting sign: 60 sf above first floor, 12 sf between 8' and first floor.Not listed
Stockyards City Development District (SYD); Stockyards City Transitional District (SYT); Scenic River Overlay Design District (SRODD); Urban Design District (UD)1Not listedExisting EMD signs prior to July 1, 2009 limited to 350 sf, with exceptions for SYD, SYT, SRODD, UD, DBD, BC at discretion of design review authority; Regatta District SRODD river crossings limited to certain unspecified sf in notes.Not listed
NC Neighborhood Conservation District – Tracts 1, 2 and 3 (NC Tracts 1, 2, 3); NC Neighborhood Conservation District – Tract 4 (NC Tract 4)1Not listedNot listedNot listed
Commercial Sign District – Residential & Low Intensity (R Sign District)1Not listedNot listedNot listed
Commercial Sign District – Commercial (C Sign District)1Not listedNot listedNot listed
Commercial Sign District – Heavy Commercial and Industrial (I Sign District)1Not listedNot listedNot listed
Commercial Sign District – Bricktown Core (BC Sign District)1Not listedNot listedNot listed
General Regulations For All Zones5Up to 50' above grade for billboards on divided, limited-access roads with ≥4 lanes (or 30' above road grade if adjacent to elevated roadway); 35' above grade for other billboards; minimum 6' clearance from bottom of display surface to ground; conditional-use billboards limited to 20' height in C-3, DBD, I-1.672 sf per face (plus 20% for cutouts/extensions) for standard billboards; conditional-use billboards in C-3, DBD, I-1 limited to 200 sf.Not listed
Scenic River Overlay Design District (SRODD)1Not listedFor new EMDs, underlying sign district (C or I) size limits apply (see Table 59-16105.3). Existing EMD signs legally installed prior to July 1, 2009 within SRODD may be up to 350 sf of the total allowable sign area (Table 59-16105.3 notes). EMDs affixed to river crossings in the Regatta District are limited to a specified sf (value truncated in excerpt) in the notes, but must not exceed those special limits.Not listed
Urban Design District (UD)1Not listedExisting EMD signs that obtained permits before July 1, 2009 within UD may be up to 350 sf of total allowable sign area (§59-16105.3 notes). New EMDs follow R/C/I/BC district size caps (Level 1/2/3) in Table 59-16105.3.Not listed
Neighborhood Conservation District (NC) – General (in addition to explicit NC Tracts already treated)1Not listedNot listedNot listed
Stockyards City Development District (SYD); Stockyards City Transitional District (SYT)24' 8" above grade.8 sf per side (Table 59-16107.3, Sandwich Board Standards).Not listed
Downtown Business District (DBD)220' max height in DBD for conditional-use billboards (§59-16111.L.2.b.2).200 sf maximum area per billboard face in DBD under conditional use standards (§59-16111.L.2.b.1).Not listed
Downtown Design District 1 (DTD-1); Downtown Design District 2 (DTD-2)1Not listedUnderlying C sign district EMD size caps apply (see Table 59-16105.3). DTD-1 “Cottage District” prohibits new EMD signs entirely (§59-16105.B.4.b.1); existing EMDs treated as nonconforming and may continue only if they meet operational standards (§59-16115.C).Not listed
Commercial Sign District – Residential & Low Intensity (R Sign District) – Additional Clarification for AA, RA2, RA110' for side-entry monuments; 6' for median monument.Each side of entry street: 64 sf; median sign: 40 sf (Table 59-16107.4).Not listed
I-1 Light Industrial District (I-1); I-2 Moderate Industrial District (I-2); I-3 Heavy Industrial District (I-3) – Additional Balloon/Roof Sign Interaction1Roof signs: no explicit extra height, but must respect building height limits; balloon roof signs: max 30' above roof surface and not exceeding allowed building height from grade (§59-16109.A.2.b.2).Roof signs: within wall sign allocation (no separate numeric cap, but typical wall sign cap 10% of wall area up to 400 sf). Balloon roof signs: if setback from ROW < balloon height, combined display area of balloon and attached signs not to exceed max attached sign area for district (§59-16109.A.2.b.1).Not listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Oklahoma City(sample of 3 of 22 zones)

AA Agricultural District (AA); RA2 Single-Family Two-Acre Rural Residential District (RA2); RA Single-Family One-Acre Rural Residential District (RA); R-1 Single-Family Residential District (R-1); R-1ZL Single-Family Residential Zero Lot Line District (R-1ZL); R-2 Medium-Low Density Residential District (R-2); R-3 Medium Density Residential District (R-3); R-3M Medium Density Multiple-Family Residential District (R-3M); R-4M Medium-High Density Multiple-Family Residential District (R-4M); R-4 General Residential District (R-4); R-MH-1 Manufactured (Mobile) Home Subdivision District (R-MH-1); R-MH-2 Manufactured (Mobile) Home Park District (R-MH-2); NC Neighborhood Conservation District – Tracts 1, 2 and 3 (NC Tracts 1, 2, 3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign (Freestanding) – R Sign District – Nonresidential & MFBy street type: 5' neighborhood; 6' main; 8' connector; 8' downtown; 8' industrial; 12' minor arterial; 12' major arterial; 12' highway.Nonresidential: 1 sf per 2 lf of frontage (both <100' and >100'), up to street-type caps (15 sf neighborhood; 25 sf main; 35 sf connector; 35 sf downtown; 20 sf industrial; 65 sf minor arterial; 100 sf major arterial; 100 sf highway). MF: 5–12 units: 8 sf; 13–29 units: 24 sf; ≥30 units: 1 sf per 2 lf of frontage, up to 100 sf.Not listedMust comply with building/zoning setbacks for structures; no specific numeric setback in table beyond sight triangle and parking prohibitions. Highway-abutting note does not alter setback.Max 1 ground sign per lot; in R sign district column: "Number (max.): 1"; MF: one per street frontage in lieu of attached sign.Freestanding on lot in R districts and NC Tracts 1–3. One ground sign per lot; MF: one per street frontage in lieu of attached sign. Must observe sight triangles (59-12300) and cannot be in required parking spaces (59-16103.F, H).Not listedUnlock§59-16106.C.1 (R sign district definition); §59-16107.A; Table 59-16107.1 (Ground Sign Standards – R column); §59-16103.F–H; §59-16105; §59-16107.A.2 (MF allowances).
Pole Sign (Freestanding) – R Sign District – Nonresidential & MFBy street type: 5' neighborhood; 6' main; 7' connector; 7' downtown; 7' industrial; 11' minor arterial; 11' major arterial; 11' highway.Nonresidential: 0.9 sf per 2 lf of frontage (both <100' and >100'), up to street-type caps (14 sf neighborhood; 23 sf main; 32 sf connector; 32 sf downtown; 18 sf industrial; 60 sf minor arterial; 90 sf major arterial; 90 sf highway). MF: 5–12 units: 7 sf; 13–29 units: 22 sf; ≥30 units: 0.9 sf per 2 lf of frontage, up to 90 sf.Not listedNo explicit numeric setback beyond general building setback and sight-distance requirements; must clear required sight triangles (§59-16103.F).Max 1 pole sign per lot in R sign district (Table 59-16107.2: "Number (max.): 1"); MF: effectively one per street frontage in lieu of attached sign via §59-16107.A.2.Freestanding pole sign on lot. One pole sign per lot; MF: permitted one per street frontage in lieu of attached sign. Must comply with sight triangles and parking space prohibitions.Not listedUnlock§59-16106.C.1; §59-16107.A; Table 59-16107.2 (Pole Sign Standards – R column); §59-16107.A.2; §59-16103.F–H; §59-16105.
Subdivision Entry Monument Sign – Each Side of Entry Street10' for each monument sign on each side of the entry street.64 sf per sign face on each side of entry street.Not listedMinimum setback: none (Table 59-16107.4), subject to other Code provisions (e.g., sight triangle, ROW rules).Max 3 monument signs per entry street (one on each side plus one in median).At subdivision or residential development entries (≥5 acres) within R sign district (agricultural, residential, mobile home, NC Tracts 1–3). One sign on each side of the entry street; optional median sign.Not listedUnlock§59-16107.C; Table 59-16107.4 (Standards for Subdivision Entry Signs – R).
Subdivision Entry Monument Sign – Median6' for median monument sign.40 sf per median sign.Not listedMinimum setback: none, but functionally constrained by median geometry and traffic safety requirements.Included in "3 monument signs" per entry street (one median, one each side).In the median of an entry street serving a subdivision or residential development ≥5 acres in R sign district.Not listedUnlock§59-16107.C; Table 59-16107.4 (Median standards).
Wall Sign – Single- & Two-Family Residential (R)Less than height of surface to which sign is attached (code "S").4 sf total wall sign area per building.Not wider than the surface to which it is affixed (§59-16108.B.4).Property line setback "Z" (as principal building setback) in Table 59-16108.1.Not expressly numbered; practical limit is 4 sf of total wall sign area per building.Attached flat to building wall of single- or two-family residence in R districts and NC Tracts 1–3, within building setbacks.Not listedUnlock§59-16106.C.1; §59-16108.A; Table 59-16108.1 (R – Single- & Two-Family Residential column); §59-16108.B.3–5.
Wall Sign – All Other Uses in R (Nonresidential, MF, Mobile Home Park)Less than height of surface to which sign is attached ("S").General: 10% of wall area up to 250 sf per wall. MF: 5–12 units: 8 sf; 13–29 units: 24 sf; ≥30 units: 1 sf per 2 lf frontage up to 100 sf (applies if MF uses wall sign instead of ground sign).Cannot be wider than the surface to which it is affixed (§59-16108.B.4).Property line setback "Z" – same as principal building setback per zoning district or master sign plan.No explicit count; regulated by total wall area percentage and allocation rules across walls.On building walls of nonresidential, MF, and mobile home park uses located in R districts and NC Tracts 1–3, within principal building setbacks.Not listedUnlock§59-16106.C.1; §59-16108.A.1–2; Table 59-16108.1 (R – All Other Uses column); §59-16105; §59-16108.B.2–5.
Awning/Canopy/Over-Canopy/Under-Canopy/Marquee Sign – R (Nonresidential Uses)Sign height limited to height of surface to which sign is attached ("S"); marquee signs may project above structure in other districts, but in R column, marquee over height is "S" as well.60 sf per tenant/occupant (Table 59-16108.3 – R column).Not listedProperty line setback "Z" – must conform to principal building setbacks or encroachment rules if over ROW.Max 1 per tenant/occupant with own ground floor entryway or storefront (Table 59-16108.3).Attached to awnings, canopies, marquees, or under-canopy elements on nonresidential buildings in R districts (NR only). One sign per each tenant/occupant with ground floor entryway/storefront.Not listedUnlock§59-16106.C.1; §59-16108.C; Table 59-16108.3 (R column – NR); §59-16108.C.1.
Detached Canopy Sign – R (Nonresidential Uses)Less than height of canopy fascia to which sign is attached ("S").10% of canopy fascia up to 20 sf per fascia sign.Not listedProperty line setback "Z"; must respect zoning setbacks and sight triangle requirements.1 sign per canopy fascia, with max 1 fascia allowed to carry signage in R.On fascia of detached canopy structure serving a nonresidential use (e.g., fuel canopies) in R districts.Not listedUnlock§59-16106.C.1; §59-16108.C.2; Table 59-16108.4 (R column).

O-1 Limited Office District (O-1); O-2 General Office District (O-2) – parcels <12,000 sf (C-Low); RC Rural Commercial District (RC); NB Neighborhood Business District (NB); C-1 Neighborhood Commercial District (C-1); C-CBD Central Business District (C-CBD); NC Neighborhood Conservation District – Tract 4 (NC Tract 4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign – C-Low Sign DistrictBy street type: 8' neighborhood; 8' main; 8' connector; 12' downtown; 12' industrial; 15' minor arterial; 15' major arterial; 20' highway.1 sf per 2 lf of frontage up to: 25 sf neighborhood; 30 sf main; 50 sf connector; 50 sf downtown; 30 sf industrial; 100 sf minor arterial; 100 sf major arterial; 100 sf highway. MF ground signs also allowed 8–100 sf per §59-16107.A.2 (for MF uses where applicable).Not listedNo special numeric setback beyond sight triangle and zoning setbacks.1 ground sign per lot (Table 59-16107.1).Freestanding on lots in C-Low districts (O-1, C-1, RC, NB, C-CBD, O-2 NR on <12,000 sf parcels, NC Tract 4).Not listedUnlock§59-16106.C.2; §59-16107.A; Table 59-16107.1 (C-Low column).
Pole Sign – C-Low Sign DistrictBy street type: 7' neighborhood; 7' main; 7' connector; 11' downtown; 11' industrial; 14' minor arterial; 14' major arterial; 18' highway.0.9 sf per 2 lf of frontage, up to: 23 sf neighborhood; 27 sf main; 45 sf connector; 45 sf downtown; 27 sf industrial; 90 sf minor arterial; 90 sf major arterial; 90 sf highway.Not listedGeneral zoning setbacks and sight triangles; no additional numeric setback in table.1 per lot (Table 59-16107.2).Freestanding pole signs in C-Low districts.Not listedUnlock§59-16106.C.2; §59-16107.A; Table 59-16107.2 (C-Low column).
Wall Sign – C-LowLess than height of surface to which sign is attached ("S").5% of wall area up to 400 sf per wall; MF wall signs 8–100 sf range for MF buildings where applicable.No wall sign wider than surface to which affixed.Setback "Z" – same as building.Regulated by wall area, not explicit count.On walls of buildings in O-1, C-1, RC, NB, C-CBD, and O-2 NR (<12,000 sf parcels) and NC Tract 4.Not listedUnlock§59-16106.C.2; §59-16108.A–B; Table 59-16108.1 (C-Low column).
Awning/Canopy/Over-/Under-Canopy/Marquee Sign – C (O-1, O-2, RC, NB, C-1, C-CBD, DBD, DTD-1, DTD-2, NC Tract 4)Awning/canopy signs: height limited by surface ("S"). Marquee signs may extend up to 6' above structure in C (Table 59-16108.3).150 sf per sign (C column).Not listedProperty line setback "Z"; projection up to 10' from building wall allowed (§59-16108.C.1).1 per tenant/occupant with own ground floor entry/storefront.On awnings, canopies, over or under canopy, or marquees of C-labeled buildings in C-Low/C-High commercial districts, including O-1, O-2, RC, NB, C-1, C-CBD, DBD, DTD-1, DTD-2, NC Tract 4.Not listedUnlock§59-16106.C.2; §59-16108.C; Table 59-16108.3 (C column).
Detached Canopy Sign – C (O-1, O-2, RC, NB, C-1, C-CBD, DBD, DTD-1, DTD-2, NC Tract 4)Height less than canopy fascia height ("S").10% of canopy fascia up to 40 sf.Not listed"Z" – principal building setbacks.1 per fascia, up to 2 fascia per canopy.On detached canopy fascia (e.g., gas stations, covered entries) in C districts.Not listedUnlock§59-16106.C.2; §59-16108.C.2; Table 59-16108.4 (C column).
Flag on Pole – C35' flagpole height max.60 sf per flag.Not listed5' from all property lines; 10' pole-to-pole and pole-to-sign spacing.Max 3 flags per lot.On private lots in C districts (O-1, O-2, RC, NB, C-1, DBD, DTD-1, DTD-2, NC Tract 4).Not listedUnlock§59-16106.C.2; §59-16109.C; Table 59-16109.1 (C column).
Incidental Signs – C8' max height.Cumulative: 85 sf per lot. Individual sign: 20 sf max.Not listedNo specific numeric setback; sign must respect sight triangles and zoning setbacks; 10' spacing between freestanding incidental signs.Max 9 per lot.On lots in C districts; freestanding or wall-mounted. Must avoid sight triangles and ROW unless allowed by §59-16113.Not listedUnlock§59-16106.C.2; §59-16110.A; Table 59-16110.1 (C column).
Temporary Subdivision Sign – C (Commercial Subdivisions)16'.300 sf per sign.Not listedBehind all platted setback lines.Multiple allowed if separated ≥400'; no explicit total cap.In commercial or mixed-use subdivisions within C sign district, behind all platted setback lines.Not listedUnlock§59-16110.A.5–6; Table 59-16110.2.

C-2 Shopping Center District (C-2); C-3 Community Commercial District (C-3); C-4 General Commercial District (C-4); C-HC Highway Commercial District (C-HC); TP Technology Park District (TP); I-1 Light Industrial District (I-1); I-2 Moderate Industrial District (I-2); I-3 Heavy Industrial District (I-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign – C-High & I-Low (C-2, C-3, I-1)8' neighborhood; 9' main; 10' connector; 12' downtown; 20' industrial; 20' minor arterial; 20' major arterial; 40' highway.Street-type caps: 40 sf neighborhood; 50 sf main; 75 sf connector; 75 sf downtown; 50 sf industrial; 150 sf minor arterial; 150 sf major arterial; 200 sf highway. MF ground signs also allowed 8–100 sf range for MF uses.Not listedNo explicit numeric setback beyond sight triangles and zoning/building setbacks.1 + 1 per 200 lf beyond 200 lf of frontage (Table 59-16107.1).Freestanding on lots in C-2, C-3, I-1.Not listedUnlock§59-16106.C.3; §59-16107.A; Table 59-16107.1 (C-High & I-Low column); §59-16107.A.3; §59-16105; §59-16114.B.2.
Ground Sign – I-High (C-4, C-HC, TP, I-2, I-3)8' neighborhood; 10' main; 12' connector; 14' downtown; 20' industrial; 20' minor arterial; 25' major arterial; 50' highway.Caps: 40 sf neighborhood; 60 sf main; 85 sf connector; 85 sf downtown; 55 sf industrial; 170 sf minor arterial; 200 sf major arterial; 300 sf highway. Highway-abutting uses allowed 200 sf regardless of frontage up to max; in I-High highway cap is 300 sf.Not listedNo explicit numeric beyond general; EMD >50 sf have extra setbacks from curb and residential uses per Table 59-16105.3.1 + 1 per 200 lf beyond 200 lf (Table 59-16107.1).Freestanding in C-4, C-HC, TP, I-2, I-3.Not listedUnlock§59-16106.C.3; §59-16107.A; Table 59-16107.1 (I-High column); §59-16107.A.3; §59-16105; §59-16114.B.2.
Pole Sign – C-High & I-Low (C-2, C-3, I-1)7' neighborhood; 8' main; 9' connector; 11' downtown; 18' industrial; 18' minor arterial; 18' major arterial; 36' highway.Caps: 36 sf neighborhood; 45 sf main; 70 sf connector; 70 sf downtown; 45 sf industrial; 135 sf minor arterial; 135 sf major arterial; 180 sf highway.Not listedNo explicit; must still meet zoning and sight triangle rules; EMD >50 sf have extra setbacks per Table 59-16105.3.1 + 1 per 200 lf beyond 200 lf (Table 59-16107.2).Freestanding pole signs in C-2, C-3, I-1.Not listedUnlock§59-16106.C.3; §59-16107.A; Table 59-16107.2 (C-High & I-Low column).
Pole Sign – I-High (C-4, C-HC, TP, I-2, I-3)7' neighborhood; 9' main; 11' connector; 13' downtown; 18' industrial; 18' minor arterial; 22' major arterial; 45' highway.Caps: 36 sf neighborhood; 55 sf main; 80 sf connector; 80 sf downtown; 50 sf industrial; 155 sf minor arterial; 180 sf major arterial; 270 sf highway.Not listedGeneral; EMD >50 sf have extra setbacks from residential property lines (300') and curb (50') per Table 59-16105.3.1 + 1 per 200 lf beyond 200 lf.Freestanding pole signs in C-4, C-HC, TP, I-2, I-3.Not listedUnlock§59-16106.C.3; §59-16107.A; Table 59-16107.2 (I-High column).
Wall Sign – I (C-2, C-3, C-4, C-HC, TP, I-1, I-2, I-3)6' max sign height for wall signs in I column (Table 59-16108.1).10% of wall area up to 400 sf per wall; MF 8–100 sf range where MF uses exist in these zones.Not wider than wall surface.Setback "Z" – same as building.Limited by wall area percentage; no explicit count limit.On walls of buildings in I sign district zones (C-2, C-3, C-4, C-HC, TP, I-1, I-2, I-3).Not listedUnlock§59-16106.C.3; §59-16108.A–B; Table 59-16108.1 (I column).
Awning/Canopy/Over-/Under-Canopy/Marquee Sign – IAwning/canopy signs: "S"; marquee signs may extend 6' above structure.150 sf per sign (I column).Not listed"Z"; projection into ROW subject to building code encroachment.1 per tenant/occupant with own ground floor entry.On awnings/canopies/marquees of buildings in C-2, C-3, C-4, C-HC, TP, I-1, I-2, I-3.Not listedUnlock§59-16106.C.3; §59-16108.C; Table 59-16108.3 (I column).
Detached Canopy Signs – I"S" (below canopy fascia height).10% / 40 sf limit.Not listed"Z".1 per fascia, up to 2 fascia per canopy.On detached canopies in I sign districts (C-2, C-3, C-4, C-HC, TP, I-1, I-2, I-3).Not listedUnlock§59-16106.C.3; §59-16108.C.2; Table 59-16108.4 (I column).
Flag on Pole – I35' pole height.60 sf per flag.Not listed5' from property lines (front and side/rear); 10' between poles and signs.Max 3 flags per lot.On lots in I sign districts and C-CBD (I column includes C-CBD).Not listedUnlock§59-16106.C.3; §59-16109.C; Table 59-16109.1 (I column).

PermitPal covers all 22 zoning districts in Oklahoma City. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Oklahoma City

  • It is unlawful for any person to erect, operate, or otherwise use any sign that is prohibited by this Article (§59-16102.A.2).
  • It is unlawful for any person to erect, operate, or otherwise use any sign at a time, place, or manner that is prohibited by this Article (§59-16102.A.3).
  • No sign shall be erected, constructed, placed, or replaced unless it conforms to this Article and all other applicable ordinances of the City (§59-16103.A).
  • If a parcel is occupied by a use or structure which does not conform to the use regulations of the applicable zoning district, no sign shall be erected on that parcel until the property is brought into compliance (§59-16103.C).
  • No sign shall encroach on sight distance triangles required by the Code for traffic and pedestrian safety (§59-16103.F).
  • Signs shall not obstruct any fire escape, stairway, or standpipe; be attached to or supported by a fire escape or stairway; interfere with a human exit through any emergency opening; obstruct an exterior door or required exit of any building; obstruct any legally required light or ventilation; or obstruct the pedestrian public way (§59-16103.G).
  • Signs shall not occupy a required parking space (§59-16103.H).
  • Supergraphics are prohibited except in the Bricktown Core Development District (BC) and Downtown Business District (DBD) and then only subject to the regulations and guidelines of the respective design districts (§59-16103.I).
  • No sign or part of a sign shall move (§59-16103.J), except as specifically allowed for Electronic Message Displays under EMD operational standards.
  • No sign shall emit any sound level that violates Chapter 34 of the Municipal Code (§59-16103.K).
  • No strobe or high-intensity intermittent lights are permitted except where required on structures for aircraft warning lights (§59-16103.L).
  • Any sign not specifically permitted by this Article is prohibited (§59-16104.A).
  • Signs in the public right-of-way are prohibited except as expressly allowed in §59-16113 (Signs in Right-of-Way or Public Property) (§59-16104.B).
  • A-frame, sandwich, springer, and swinger signs are prohibited except as specifically allowed in the Bricktown Core Development District (BC), Downtown Business District (DBD), Stockyards City Development District (SYD), and Urban Design (UD) districts and then subject to the regulations and guidelines of those districts (§59-16104.C).
  • Portable signs are declared a public nuisance and are prohibited (§59-16104.D).
  • Attention-getting devices are prohibited except where specifically allowed by this Article (§59-16104.E).
  • Projection image signs are prohibited outside the Bricktown Core Development (BC) and Downtown Design (DBD, DTD-1, DTD-2) districts (§59-16105.A.7.a implicitly, since they are limited to those districts).
  • Flashing or intermittent lighting is prohibited on signs, other than permitted electronic message displays (§59-16105.A.4).
  • EMD Level 2 and Level 3 displays are not allowed in zoning districts or sign types where Tables 59-16105.3 and 59-16107/16108/16110 indicate they are not permitted (general prohibition by matrix).
  • EMD signs are prohibited within DTD-1 in the area known as the Cottage District and within 100 feet of the river in the SRODD (except certain river-crossing signs) (§59-16105.B.4.b).
  • No freestanding sign shall be placed on or over a public street, public median, public alley, or other public right-of-way except as specifically permitted in §59-16113.B or other sections of the Article (§59-16113.A.1).
  • The painting, scattering, posting, or spreading of any sign on any public right-of-way or public property is prohibited, including posting on any light pole or utility pole or device, except where specifically allowed by this Article (§59-16113.A.3).
  • No balloon, regardless of size, shall be located in the street right-of-way, nor allowed, when tethered to a site, to drift into the street right-of-way or utility wires (§59-16109.A.4).
  • Signs painted or affixed to trucks or semitrailers are prohibited unless those vehicles are parked in a defined storage area as permitted by Chapter 59 (§59-16109.D.2).
  • No portable, A-frame, sandwich, swinger, or similar sign shall be mounted on a vehicle (§59-16109.D.3).
  • Temporary signs in public rights-of-way are prohibited unless they comply with the permit, size, location, and timing requirements of §59-16113.B; any temporary sign without a current sticker is deemed unlawfully posted (§59-16113.B.1–3,7).
  • Billboards may not use Level 2 or Level 3 electronic message displays; only Level 1 EMD is allowed (§59-16111.J).
  • Billboards may not have flashing or intermittent lighting (§59-16111.I).
  • No billboard may be placed on the roof or walls of a building, though they may be constructed over a roof with specified clearance (§59-16111.F.4).
  • No billboard is permitted within designated Scenic Corridors, including the Downtown Scenic Highway Area (§59-16111.K.5).
  • No billboard may be constructed, erected, placed, or replaced closer than the specified distances to residentially zoned property, detached single- or two-family dwellings, or HP/HL zoning districts (§59-16111.H).
  • Any sign erected without a permit where a permit is required is subject to immediate removal (§59-16115.A.5).
  • Snipe signs (signs illegally attached to utility poles or public signs) are prohibited by definition and enforcement provisions (§59-16116.B combined with definition of Snipe Sign).
  • Any sign situated in the right-of-way of a public street (unless authorized), in a required sight triangle, unanchored, or severely damaged is declared a public nuisance and may be immediately impounded (§59-16116.B.1–2).

Exempt Signs in Oklahoma City

  • Indoor signs not visible from any point outside the structure are exempt from this Article, although they still require applicable building and electrical permits (§59-16102.B.1).
  • Vehicle signs (signs affixed to a vehicle) are exempt from this Article except as specifically regulated in §59-16109.D (§59-16102.B.2).
  • Any sign required by state or federal law is exempt from this Article (§59-16102.B.3).
  • This Article does not supersede a PUD or SPUD design statement that was validly approved prior to the effective date of this Section (§59-16102.B.4).
  • Signs on tablets not exceeding 20 square feet, when cut into masonry or constructed of bronze or other incombustible material, are exempt from the wall-sign regulations (§59-16108.B.2).
  • Ghost signs in the BC district may be restored or replaced within the limits of the existing sign subject to a Certificate of Approval and do not require a sign permit; they are not counted toward maximum wall sign area (§59-16108.B.6.b–c).
  • Certain small wall signs, cornerstones, and tablets as described in §59-16108.B.2 are exempt from the general wall sign standards.
  • Incidental signs, within the dimensional limits of Table 59-16110.1, do not require a sign permit (§59-16110.A.1).
  • Temporary subdivision signs that meet the standards in Table 59-16110.2 do not require a permit (§59-16110.A.4–B and Table 59-16110.2, item 2).
  • Murals do not require a sign permit unless they are mechanically attached, contain electrical components, or have three-dimensional elements (§59-16112.E.1.a).
  • Murals painted directly on a wall that do not meet any of the triggers in §59-16112.E.1.a are exempt from sign permit requirements (though still subject to any design/historic review where applicable).
  • Certain signs in design, zoning overlay, or historic districts may be governed by those district regulations instead of this Article where there is a conflict, effectively exempting them from conflicting provisions of the Sign Code (§59-16102.E).

Sign Plan & Submission Notes for Oklahoma City

  • A sign within a PUD or SPUD is subject to the requirements of this Article and any applicable approved master sign plan; a PUD or SPUD may not be used to make sign standards less restrictive (§59-16102.D.1).
  • The master sign plan for a PUD or SPUD must comply with the number, area, height, and design requirements for the applicable sign district and may include modifications permitted by §59-16114 (§59-16102.D.2).
  • All applicable provisions of this Article (including the sign district standards in effect when the master site plan is approved) apply to any master sign plan for a PUD or SPUD to the extent not inconsistent with the approved plan (§59-16102.D.3).
  • A master sign plan is required for: (1) any development or redevelopment of at least 5 acres; (2) any PUD or SPUD; or (3) any other applicant who voluntarily elects to file one as part of a sign permit application (§59-16114.B.1.a).
  • The master sign plan requirement does not apply to minor subdivisions in the Residential (R) sign districts (§59-16114.B.1.b).
  • Master sign plan incentives: for non-residential or mixed-use projects with multiple individual buildings on individual lots, buildings without a street-facing wall sign may receive ground signs if included on an approved master sign plan and if the ground sign does not exceed 70% of the height and 15% of the area of the street-facing façade (§59-16114.B.2.a).
  • Under a master sign plan, the maximum height of ground signs may be increased by 10%, and the maximum area of any individual ground sign may be increased by 15%; if multiple ground signs are consolidated into one, its area may be increased by up to an additional 350 square feet (§59-16114.B.2.b).
  • Under a master sign plan, the maximum cumulative sign area for all ground signs in the project may be increased by 15%, with no more than an additional 50 square feet assigned to any individual sign (§59-16114.B.2.b.3).
  • Under a master sign plan, the maximum cumulative sign area for wall and projecting signs may be increased by 10%, with no more than an additional 40 square feet assigned to any individual sign (§59-16114.B.2.c).
  • A master sign plan must comply with all applicable requirements of the Article, integrate signs into a unified development concept, and ensure consistent mounting and coordination with building architecture (§59-16114.B.4).
  • A master sign plan must be submitted as part of the sign permit application unless requested as part of a PUD/SPUD approval; even when approved with a PUD/SPUD, individual sign permits are still required for signs under the plan (§59-16114.B.5.a).
  • Master sign plan submittals must include an overall sign program (design, lighting, color, materials, construction), a written statement with scaled graphics detailing size, location, and type of each sign, a site plan and elevations for freestanding signs, standards for attached signs, and signatures of all property owners subject to the plan (§59-16114.B.5.b–c).
  • Where a zoning district standard references “Z” for setbacks or similar, it may be controlled by an applicable sign master plan rather than the base zoning standard (§59-16107.4 and other tables’ rules of interpretation).
  • Applicants may seek a hardship variance from the Board of Adjustment or, alternatively, pursue a master sign plan to modify certain standards; Table 59-16114.14 summarizes how variances and master sign plans can be used to modify sign standards (§59-16114.C and Table 59-16114.14).

Source: other municipal code