Sign Regulations in Fountain Hill Borough, Pennsylvania

Fountain Hill Borough, Pennsylvania has specific sign regulations covering 18 sign types across 4 zoning districts. Regulated sign types include Historic Sign, Holiday Decorations, Not-Readable Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Fountain Hill Borough, Pennsylvania

Sample Sign Requirements in Fountain Hill Borough

Sign TypeMax HeightMax AreaSetback
Vehicle/Trailer Functioning as Sign20 sq ft (incidental, otherwise see freestanding requirements)
Off-Premises Sign (Billboard)35 ft above adjacent street or highway300 sq ft per sign face25 ft minimum from all lot lines and rights-of-way
Freestanding SignStandard allowance according to Table of Freestanding, Wall and Window Signs + 25% (if not internally illuminated and base is landscaped)

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Fountain Hill BoroughFull Coverage

Sign Types Covered

18

  • Historic Sign
  • Holiday Decorations
  • Not-Readable Sign
  • Official Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Fountain Hill Borough

Municipal Code2 permit application links available

Frequently Asked Questions

Sign height limits in Fountain Hill Borough vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Fountain Hill Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Fountain Hill Borough, regulated sign types include Historic Sign, Holiday Decorations, Not-Readable Sign, Official Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Fountain Hill Borough vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Fountain Hill Borough are regulated with specific requirements for brightness, animation, and message duration. Fountain Hill Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Fountain Hill Borough Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Fountain Hill Borough, Pennsylvania sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Fountain Hill Borough, Pennsylvania Sign Rules at a Glance

Fountain Hill Borough, Pennsylvania regulates 18 sign types across 4 zoning districts. Off-Premises Sign (Billboard)s in the GC District zoning district are capped at 35 ft above adjacent street or highway tall and 300 sq ft per sign face, with a 25 ft minimum from all lot lines and rights-of-way setback (Sec. § 712.D). Most commercial signs in Fountain Hill Borough require a permit.

Detailed Sign Ordinance Requirements for Fountain Hill Borough, Pennsylvania

Sign Rules by Zoning District in Fountain Hill Borough (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones820 sq ft (incidental, otherwise see freestanding requirements)
GC District135 ft above adjacent street or highway300 sq ft per sign face
Commercial district1Standard allowance according to Table of Freestanding, Wall and Window Signs + 25% (if not internally illuminated and base is landscaped)
Institutional Zoning District810 ft300 sq ft per side (two sides allowed, up to 600 sq ft total)

Zone-by-Zone Sign Requirements in Fountain Hill Borough(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Historic SignAs authorized by the Borough or a county, state, or federal agency.Unlock§ 703.B(1)
Holiday DecorationsRecognized holidays by the Borough, county, state or federal government; must not include advertising.Unlock§ 703.B(2)
Not-Readable SignNot readable from any public street or exterior lot line.Unlock§ 703.B(3)
Official SignState, county, Borough, or other legally constituted government; for public purposes.Unlock§ 703.B(4)
Required SignIncludes information required by a government agency or the Borough.Unlock§ 703.B(5)
Right-of-Way SignWithin the right-of-way of a public street, officially authorized by the Borough or PennDOT.Unlock§ 703.B(6)
Portable SignUnlock§ 704.C
Vehicle/Trailer Functioning as Sign20 sq ft (incidental, otherwise see freestanding requirements)Front yard, in clear view of street—subject to freestanding sign regulations if not moved weekly.Unlock§ 708

GC District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Off-Premises Sign (Billboard)35 ft above adjacent street or highway300 sq ft per sign face25 ft minimum from all lot lines and rights-of-wayMaximum one per lotMinimum 25 ft setback from all lot lines and street right-of-way.Unlock§ 712.D

Institutional Zoning District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall, Banner, and Window Signs (Aggregate)Top of stair towers, penthouses or equipment screens (not above highest part of building)5% of wall face area per building faceOn faces of buildings within an institutional campus.Unlock§ 713.D/E
Freestanding Identification Sign (Entrance or Intersection)10 ft250 sq ft per signUp to two per entrance drive, one per intersection cornerAt each entrance drive and at intersection corners abutting campus.Unlock§ 713.E
Pole-Mounted Flag or Pennant Sign (Standard)24 sq ftDriveways, walkways, plazas, parking lots, except as below.Unlock§ 713.F
Pole-Mounted Flag or Pennant Sign (Within 100 ft of Entrance)40 sq ftWithin 100 feet of a building entrance.Unlock§ 713.F
Building or Structure Name SignNo greater than top of building or structureOn building or structureUnlock§ 713.G
Freestanding Electronic or Digital Message Sign300 sq ft per side (two sides allowed, up to 600 sq ft total)See additional requirements; includes buffer from intersections and driveways.One per institutional campusOn-campus, subject to spacing and sight distance controls.Unlock§ 713.H
Temporary Sign or BannerInstitutional campusUnlock§ 713.I
Non-legible/Directional SignsSigns not legible from expressway, public street or residential lot, as well as for traffic control/direction.Unlock§ 713.J

PermitPal covers all 4 zoning districts in Fountain Hill Borough — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Fountain Hill Borough — start free

Prohibited Signs in Fountain Hill Borough

  • Portable signs are prohibited in all districts, except as a temporary charitable event sign complying with § 703.
  • A sign shall not intrude into or project over an existing street right-of-way, unless specifically authorized by a permit from the Borough or PennDOT.
  • No sign shall be so located that it interferes with sight clearance requirements.
  • No sign except permitted off-premises, official, political or public service signs shall be erected on a property to which it does not relate.
  • No sign shall be posted on any property or sign pole or public utility pole unless permission has been received from the owner.
  • Any moving object used to attract attention to a commercial use shall be prohibited.
  • Any banner or flag that does not meet the requirements of this Part 7 shall be prohibited.
  • Flashing, blinking, twinkling, animated or moving signs of any type shall be prohibited.
  • A sign may electronically change from one message to another provided that the message does not flash and stays on for a duration of at least 25 seconds.
  • Flashing lights visible from a street shall not be used to attract attention to a business.
  • Signs which emit smoke, visible vapors or particles, sound or odor shall be prohibited.
  • Signs are prohibited which contain information that states that a lot may be used for any purpose not permitted under the applicable provisions of this Chapter.
  • Signs shall be prohibited that are of such character, form, shape or color that they imitate or resemble any official traffic sign, signal or device or which are likely to confuse or distract the operator of a motor vehicle on a public street (such as prominent use of the word 'danger').
  • Signs or displays visible from a lot line that include words or images that are obscene or pornographic shall be prohibited.
  • Balloons of greater than 40 cubic feet that are tethered to the ground or a structure for periods of 12 hours shall be prohibited.
  • Floodlights and outdoor lasers used for advertising purposes shall be prohibited.
  • Every sign (except allowed temporary signs) shall be constructed of durable materials and kept in good condition and repair; damaged, dilapidated or unsafe signs must be repaired or removed as ordered by the Borough.

Exempt Signs in Fountain Hill Borough

  • Signs meeting the requirements of § 703 (Miscellaneous Signs Not Requiring Permits) do not require a zoning permit.
  • Nonilluminated window signs constructed of paper, posterboard or similar materials that are not of a permanent nature do not require a permit.
  • Historic Signs specifically authorized by the Borough or a county, state or federal agency are not regulated by this Part 7.
  • Holiday Decorations that commemorate a government-recognized holiday and do not include advertising are not regulated by this Part 7.
  • A sign that is not readable from any public street or any exterior lot line is not regulated by this Part 7.
  • Official Signs erected by the state, county, Borough or other legally constituted governmental body, or specifically authorized by Borough ordinance or resolution, which exist for public purposes, are not regulated by this Part 7.
  • A required sign that only includes information required to be posted outdoors by a government agency or the Borough is not regulated by this Part 7.
  • A right-of-way sign posted within the existing right-of-way of a public street and officially authorized by the Borough or PennDOT is not regulated by this Part 7.
  • Changes (such as painting, repair or change in logo/message) to lawfully existing signs that do not increase sign area or make the sign noncompliant or more nonconforming do not require a new permit.
  • PennDOT signs are permitted by right in all districts.

Sign Plan & Submission Notes for Fountain Hill Borough

  • A zoning permit is required for all signs, except for signs meeting the requirements of § 703 and certain short-term window signs.
  • No specific reference to a master sign plan or variance meeting requirement in the provided text.
  • For institutional campus electronic graphic display signs, a certification from the sign manufacturer verifying compliance with automatic dimming technology must be submitted with the sign permit application.
  • For institutional campus electronic graphic display signs, an operation test report certified by an electrical or professional engineer (as part of final inspection) must be submitted showing the sign complies with luminance requirements.

Source: ecode360 municipal code