Questions? Call us at (262) 218-2915

Sign Regulations in Richmond Township, Pennsylvania

Richmond Township, Pennsylvania has specific sign regulations covering 24 sign types across 6 zoning districts. Regulated sign types include Wall Sign, Ground-Pole Sign (One Face), Ground-Pole Sign (Double-Faced Back-to-Back). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Richmond Township, Pennsylvania

Sample Sign Requirements in Richmond Township

Sign TypeMax HeightMax AreaSetback
Name and Address SignNot listed1 sq ftNot listed
Home Occupation SignNot listed16 sq ftNot listed
No Trespassing/Regulatory Sign (Residential Zones)Not listed1 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Richmond TownshipFull Coverage

Sign Types Covered

24

  • Wall Sign
  • Ground-Pole Sign (One Face)
  • Ground-Pole Sign (Double-Faced Back-to-Back)
  • Projecting Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Richmond Township

Frequently Asked Questions

In Richmond Township, the height limit for Projecting Sign in the commercial zones is 10 ft vertical dimension (Sec. 27-1131). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Richmond Township require a permit. From the submission notes on this page: A plan drawn to scale showing the design of the sign, materials, method of construction, and means of attachment must be submitted with the permit application for any permanent sign (§27-1152.2.C). Run a code check for an exact address to see the permit requirements for that zone.

Richmond Township's sign code covers 24 sign types, including Wall Sign, Ground-Pole Sign (One Face), Ground-Pole Sign (Double-Faced Back-to-Back), and Projecting Sign. Most commercial signs need a permit. The ordinance lists 1 exemption, shown in full on this page.

We haven't published Richmond Township's sign setback rules on this page yet. Run a code check for an exact address to see them.

Rules in Richmond Township's sign ordinance that cover digital, changing, or flashing signs: Signs which incorporate any flashing or moving illumination or illumination which varies in intensity or color, or have any visible moving or revolving parts, except swinging signs, clocks, temperature signs, and barber poles that comply with other provisions. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Richmond Township Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Richmond Township, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Richmond Township, Pennsylvania Sign Rules at a Glance

Richmond Township, Pennsylvania regulates 24 sign types across 6 zoning districts. Projecting Signs in the commercial zones are capped at 16 sq ft per face (Sec. 27-1131). Most commercial signs in Richmond Township require a permit.

Detailed Sign Ordinance Requirements for Richmond Township, Pennsylvania

Sign Rules by Zoning District in Richmond Township (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones16Not listed32 sq ftNot listed
AR zones2Not listed4 sq ftNot listed
commercial zones510 ft vertical dimension288 sq ft per faceNot listed
manufacturing zones510 ft vertical dimension288 sq ft per faceNot listed
residential zones1Not listedAs per §27-1120[1]: 1 sq ft per lineal front foot of main building, min 10 sq ft, max 80 sq ft per premises (combined permanent and temporary signs)Not listed
commercial and industrial zones510 ft vertical dimension288 sq ft per faceNot listed

Zone-by-Zone Sign Requirements in Richmond Township(sample of 3 of 6 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
No Trespassing/Regulatory Sign (Residential Zones)Not listed1 sq ftNot listedNot listedNot listedResidential zonesNot listedUnlock§27-1116[1][C]
No Trespassing/Regulatory Sign (Commercial/Industrial Zones)Not listed4 sq ftNot listedNot listedNot listedCommercial and industrial zonesNot listedUnlock§27-1116[1][C]
Real Estate Sign (Residential Zones)Not listed8 sq ftNot listedNot listedNot listedResidential zonesNot listedUnlock§27-1116[1][D]
Real Estate Sign (Commercial/Industrial Zones)Not listed16 sq ftNot listedNot listedNot listedCommercial and industrial zonesNot listedUnlock§27-1116[1][D]
Institutional SignNot listed16 sq ft (single-faced), 32 sq ft (double-faced)Not listedNot listedNot listedOn premises of institutionNot listedUnlock§27-1116[1][E]
Temporary Farm Product or Charitable/Public Event SignNot listed16 sq ftNot listedNot listedNot listedMust advertise edible farm products produced on premises or public/charitable eventsNot listedUnlock§27-1116[1][J]
Permanent Residential Development SignNot listed16 sq ftNot listedNot listedNot listedAt major entrances to residential subdivisionNot listedUnlock§27-1116[1][K]
Recreational Facility SignNot listed32 sq ftNot listedNot listedNot listedOn premises of recreational facilityNot listedUnlock§27-1116[1][L]

commercial zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed288 sq ft per faceNot listedNot listedNot listedOn wall of buildingNot listedUnlock§27-1132; §27-1120[2]
Ground-Pole Sign (One Face)Not listed288 sq ft per faceNot listedNot listedNot listedNot listedNot listedUnlock§27-1120[2]; §27-1133
Ground-Pole Sign (Double-Faced Back-to-Back)Not listedUp to 288 sq ft per face, 576 sq ft total aggregateNot listedNot listedNot listedNot listedNot listedUnlock§27-1120[3]
Projecting Sign10 ft vertical dimension16 sq ft per face6 ft projection from buildingNot listedOne per premises (one per public way if on corner/multiple entrances)Projecting from wall of buildingNot listedUnlock§27-1131
Roof SignAs per formulaNot listedNot listedNot listedOne per premisesOn or above roof of buildingNot listedUnlock§27-1134

manufacturing zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed288 sq ft per faceNot listedNot listedNot listedOn wall of buildingNot listedUnlock§27-1132; §27-1120[2]
Ground-Pole Sign (One Face)Not listed288 sq ft per faceNot listedNot listedNot listedNot listedNot listedUnlock§27-1120[2]; §27-1133
Ground-Pole Sign (Double-Faced Back-to-Back)Not listedUp to 288 sq ft per face, 576 sq ft total aggregateNot listedNot listedNot listedNot listedNot listedUnlock§27-1120[3]
Projecting Sign10 ft vertical dimension16 sq ft per face6 ft projection from buildingNot listedOne per premises (one per public way if on corner/multiple entrances)Projecting from wall of buildingNot listedUnlock§27-1131
Roof SignAs per formulaNot listedNot listedNot listedOne per premisesOn or above roof of buildingNot listedUnlock§27-1134

PermitPal covers all 6 zoning districts in Richmond Township. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Richmond Township

  • Signs which incorporate any flashing or moving illumination or illumination which varies in intensity or color, or have any visible moving or revolving parts, except swinging signs, clocks, temperature signs, and barber poles that comply with other provisions.
  • Light sources illuminating signs must be shielded so bulbs, floodlights, or tubes are not visible off the property.
  • Any sign or sign structure which constitutes a hazard to public safety or health.
  • Any sign which by reason of size, location, content, coloring, or illumination obstructs driver vision or detracts from visibility or effectiveness of any traffic sign or control device on public streets and roads.
  • Any sign which obstructs free ingress or egress from a fire escape, door, window, or other required exit.
  • Signs that use words or symbols such as 'Stop', 'Look', 'One-Way', 'Danger', 'Yield', or similar, in a way to interfere with, mislead, or confuse traffic.
  • Any obsolete sign no longer advertising a bona fide business or product (to be removed within 90 days).
  • Signs on public property or public rights-of-way unless erected or required by a governmental body, and signs on public property or rights-of-way may not bear commercial advertising.
  • Signs painted on, attached to, or supported by a tree, stone, cliff, or other natural object.
  • Unshielded string lights, other than temporary holiday decorations.
  • Searchlights, pennants, spinners, banners, streamers, and other forms of outdoor advertising not specifically mentioned, except for grand openings and community affairs and then only with Zoning Officer's permission, limited to thirty days.
  • No more than four signs may be erected or maintained on any premises at any one time (with limited exception for corner lots and premises with multiple entrances).
  • No sign or any part thereof, including supports or lights, may exceed a height of 25 feet.
  • Sign area limits per premises (varies by zone and type).
  • The largest sign on a premises may not advertise any particular article of merchandise unless it is the principal product sold or manufactured on site.
  • All signs and their components must be constructed and maintained in compliance with applicable building, electrical, and fire codes.
  • All signs and parts thereof must be kept in a good state of repair and maintenance.

Exempt Signs in Richmond Township

  • Signs listed in §27-1116 (such as name and address identification, home occupation signs, no trespassing signs, real estate signs, institutional signs, small traffic/parking/function signs, governmental signs, memorial signs/tablets, government or organizational flags/insignia, certain temporary farm/special event signs, residential development entrance signs, and recreation facility identification) are permitted in all districts, do not require permits or licenses, and are not counted toward sign total per premises (but must conform to general regulations).

Sign Plan & Submission Notes for Richmond Township

  • A plan drawn to scale showing the design of the sign, materials, method of construction, and means of attachment must be submitted with the permit application for any permanent sign (§27-1152.2.C).
  • Permit applications must include a scaled map showing the sign’s location in relation to buildings, thoroughfares, and other signs, as well as their size and dimensions (§27-1152.2.B).
  • No permit will be issued for a sign in excess of 80 square feet unless a special exception (variance) has been granted (§27-1152.5).
  • If the Zoning Officer finds a permit application would result in a code violation, the applicant may modify the plan or request a special exception (§27-1152.6).
  • If wishing to display a sign not permitted by the ordinance, the owner or lessor may apply for a special exception (variance) to the Zoning Hearing Board (§27-1143).

Source: ecode360 municipal code