Questions? Call us at (262) 218-2915

Sign Regulations in Ridley Park Borough, Pennsylvania

Ridley Park Borough, Pennsylvania has specific sign regulations covering 19 sign types across 10 zoning districts. Regulated sign types include Awning Sign, Canopy Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Ridley Park Borough, Pennsylvania

Sample Sign Requirements in Ridley Park Borough

Sign TypeMax HeightMax AreaSetback
Freestanding Pole Sign20 feet in residential and C-1 Districts; 35 feet in all other districts, measured from grade levelNot listedMinimum 6 feet behind front property line
Freestanding Ground Sign6 feet above ground levelNot listedSame as Freestanding Pole Sign (minimum 6 feet behind front property line)
Window SignNot listed20% of the total window areaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Ridley Park BoroughFull Coverage

Sign Types Covered

19

  • Awning Sign
  • Canopy Sign
  • Wall Sign
  • Freestanding Sign (Ground or Pole)
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Ridley Park Borough

Municipal Code1 permit application link available

Ridley Park Borough, Pennsylvania Sign Rules at a Glance

Ridley Park Borough, Pennsylvania regulates 19 sign types across 10 zoning districts. Freestanding Ground Signs are capped at 6 feet above ground level (Sec. 213-93M). Most commercial signs in Ridley Park Borough require a permit.

Detailed Sign Ordinance Requirements for Ridley Park Borough, Pennsylvania

Sign Rules by Zoning District in Ridley Park Borough (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones720 feet in residential and C-1 Districts; 35 feet in all other districts, measured from grade level20% of the total window area
Residential Districts76 feetSame as § 213-99A(1)
R-3 District26 feet24 sq ft
C-1 Commercial District5Not listed30 sq ft
C-2 Commercial District5Not listed50 sq ft
Medical Campus District5Not listed60 sq ft (100 sq ft allowed for two wall signs by special exception if frontage is 100 ft or more)
Interstate Fronting Civic Use District6120 ft1200 sq ft (gross surface area)
Parks and Open Space District5Not listed30 sq ft
Industrial District2Not listed75 sq ft; 125 sq ft if special exception applies
Historic Districts1Not listedNot listed

Zone-by-Zone Sign Requirements in Ridley Park Borough(sample of 3 of 10 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaSetbackLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Pole Sign20 feet in residential and C-1 Districts; 35 feet in all other districts, measured from grade levelNot listedMinimum 6 feet behind front property lineMinimum 6 feet behind the front property line. No portion less than 6 feet behind the front property lineUnlock§ 213-93L
Freestanding Ground Sign6 feet above ground levelNot listedSame as Freestanding Pole Sign (minimum 6 feet behind front property line)Setback as required for freestanding pole signsUnlock§ 213-93M
Window SignNot listed20% of the total window areaNot listedAffixed to windowUnlock§ 213-93N
Temporary SignNot listedNot listedNot listedNot listedUnlock§ 213-93O
Awning SignNot listedNot listedNot listedProject up to 4 feet into right-of-way (must remain at least 1 foot from curbline)Unlock§ 213-93P
Canopy SignNot listedNot listedNot listedNo post allowed in right-of-wayUnlock§ 213-93P
Real Estate Sign - For Sale/DevelopmentNot listed16 sq ft (residential districts); 30 sq ft (nonresidential districts)Not listedOn property for sale/developmentUnlock§ 213-93Q

Residential Districts

Sign TypeMax HeightMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Identification for apartments, townhomes, churches, etc.)Not listed16 sq ft (24 sq ft in R-3 District)1 per use/structure; or 2 if fronting 2 streetsOn buildingUnlock§ 213-99A(1)
Freestanding Ground Sign (Identification for apartments, townhomes, churches, etc.)6 feet16 sq ft (24 sq ft in R-3 District)1 per use/structure; or 2 if fronting 2 streetsNot listedUnlock§ 213-99A(1)
Wall Sign (Permanent for schools/religious/other nonresidential uses)Not listed24 sq ft1 per use/structure; or 2 if fronting 2 streetsNot listedUnlock§ 213-99A(2)
Freestanding Sign (Permanent for schools/religious/other nonresidential uses)Not listed24 sq ft1 per use/structure; or 2 if fronting 2 streetsNot listedUnlock§ 213-99A(2)
Identification Sign (Nonresidential nonconforming uses)Not listedSame as § 213-99A(1)Not listedNot listedUnlock§ 213-99A(3)
Wall or Freestanding Sign (Residential professional offices)Not listed12 sq ftNot listedNot listedUnlock§ 213-99A(4)
Nameplate SignNot listed2 sq ftNot listedOn private residencesUnlock§ 213-99A(5), § 213-95D(3)

Interstate Fronting Civic Use District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed60 sq ft (100 sq ft allowed for two wall signs by special exception if frontage is 100 ft or more)Not listed1 (2 by special exception for 100+ ft frontage)On buildingUnlock§ 213-99E, 213-99D
Awning SignNot listed60 sq ftNot listedNot listedNot listedUnlock§ 213-99E, 213-99D
Freestanding Sign (Ground or Pole)Not listed50 sq ftNot listedNot listedNot listedUnlock§ 213-99E, 213-99D
Projecting SignNot listed20 sq ftNot listedNot listedNot listedUnlock§ 213-99E, 213-99D
Canopy SignNot listed20 sq ftNot listedNot listedNot listedUnlock§ 213-99E, 213-99D
Billboard120 ft1200 sq ft (gross surface area)Min. 120 feet from any residential zoning district (measured horizontally); within 200 feet of I-95 right-of-way1 permitted (Borough or county-owned)Within 200 feet of right-of-way of Interstate 95; not mounted on a building, wall, or other structureUnlock§ 213-100

PermitPal covers all 10 zoning districts in Ridley Park Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Ridley Park Borough

  • No sign shall be constructed from bare plywood.
  • No sign shall create a public nuisance by emitting smoke, sound, vapor, beams or rays, particle emission, or odors.
  • No sign or sign structure shall be erected unless it complies with all applicable requirements of the Pennsylvania Uniform Construction Code.
  • No sign shall be erected within the right-of-way lines of any public street, and no sign shall be closer than six feet to the right-of-way line of a public street, unless specifically authorized.
  • All permanent signs over four square feet in size must be constructed by a professional sign company.
  • Except for official, incidental, directional, wayfinding signs, or billboards, all permanent signs must be located on the property to which the text or message applies.
  • No illuminated sign shall be lighted on days when the business or permitted use is not open for business.
  • Internally illuminated signs are not permitted in Historic Districts.
  • Electrical supply to all exterior signs must be by means of concealed (and for freestanding signs, underground) cables.
  • Applications for electrical permits must be filed at the same time as the sign permit application.
  • Signs cannot obstruct access to or from any door, window, fire escape, or ventilating equipment, nor be attached to any standpipe or fire escape.
  • Temporary commercial advertising signs may not be attached to fences.
  • No sign shall be erected, altered, repaired, or relocated without first obtaining a sign permit, unless the sign is specifically exempt from permit requirements.
  • Unlawful/prohibited sign types: any sign which by color, shape, or location conflicts with or resembles a traffic signal device; signs attached to rocks, utility poles, parking meters, traffic signposts, traffic signals or control devices, street signs, or historical markers; signs attached to trees, shrubs, or living vegetation; signs erected without the permission of the property owner or authorized agent; signs that create a hazard by obstructing the clear view of vehicles and pedestrian traffic; animated signs; signs that obstruct free ingress to or egress from a required door, window, fire escape, or other required exit; vehicular signs; abandoned signs; flashing signs; revolving signs; tethered balloons; roof signs; wall signs that cover windows or architectural detail; banners longer than 150% of the street frontage; signs with reflective backgrounds.

Exempt Signs in Ridley Park Borough

  • Official signs posted in the strict performance of lawful governmental functions, such as roadway signs indicating route number, street name, traffic, and parking.
  • Small signs not exceeding two square feet that are necessary for traffic movement on private property.
  • Memorial or historic markers where approved by the Historical and Architectural Review Board or the Planning Commission.
  • Small temporary signs not exceeding four square feet, with up to three such signs per parcel without a permit as long as total does not exceed 10 square feet.
  • Nameplate signs on private residences that do not exceed one square foot.
  • No permit is required for maintenance of a sign or change of copy on a legally conforming painted, printed, or changeable copy sign (as long as the message or appearance does not change other than repainting).

Sign Plan & Submission Notes for Ridley Park Borough

  • For awning and canopy signs, a permit must be obtained from the Zoning Officer following a review by the Planning Commission.
  • For signs in Historic Districts, no sign shall be erected or altered until an application for a certificate of appropriateness has been reviewed and approved by the Historical and Architectural Review Board (HARB) and after Borough Council has issued a certificate of appropriateness. Applications must include detailed plans, scaled drawings, material samples, site plan for ground signs, and info on type of illumination.
  • For parking lots with more than 20 spaces, the property owner shall prepare a site plan (subject to the approval of the Chief of Police) showing signage locations for towing warning signs; signs must then be posted and maintained in accordance with the approved site plan.
  • Permits for illuminated signs will not be issued without an approved electrical permit. Applications for electrical permits must be filed at the same time as the sign permit application.
  • If a legally nonconforming sign is to be damaged or altered, a new permit must be obtained and the sign brought into compliance with current code.
  • Where special exceptions are required for additional sign allowances (such as for large buildings with multiple signs), a special exception process (e.g., variance or hearing) is indicated.

Source: ecode360 municipal code

Frequently Asked Questions

In Ridley Park Borough, the height limit for Freestanding Ground Sign is 6 feet above ground level (Sec. 213-93M). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Ridley Park Borough require a permit. From the submission notes on this page: Permits for illuminated signs will not be issued without an approved electrical permit. Applications for electrical permits must be filed at the same time as the sign permit application. Run a code check for an exact address to see the permit requirements for that zone.

Ridley Park Borough's sign code covers 19 sign types, including Awning Sign, Canopy Sign, Wall Sign, and Freestanding Sign (Ground or Pole). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Small temporary signs not exceeding four square feet, with up to three such signs per parcel without a permit as long as total does not exceed 10 square feet. The full list is on this page.

In Ridley Park Borough, Freestanding Pole Sign must be set back at least 6 feet behind front property line (Sec. 213-93L). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

AI-Powered Research

Ready to Research Ridley Park Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Ridley Park Borough, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds