Sign Regulations in Vandergrift Borough, Pennsylvania

Vandergrift Borough, Pennsylvania has specific sign regulations covering 12 sign types across 3 zoning districts. Regulated sign types include Property Identification Sign, Temporary Real Estate Sign, Public or Semipublic Institution Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Vandergrift Borough, Pennsylvania

Sample Sign Requirements in Vandergrift Borough

Sign TypeMax HeightMax AreaSetback
Property Identification Sign12 feet (measured from the topmost part of the sign to the ground below)2 square feet per face
Temporary Real Estate Sign12 feet16 square feet per face
Public or Semipublic Institution Sign12 feet16 square feet per face

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Vandergrift BoroughFull Coverage

Sign Types Covered

12

  • Property Identification Sign
  • Temporary Real Estate Sign
  • Public or Semipublic Institution Sign
  • Temporary Contractor/Designer Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Vandergrift Borough

Frequently Asked Questions

Sign height limits in Vandergrift Borough vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Vandergrift Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Vandergrift Borough, regulated sign types include Property Identification Sign, Temporary Real Estate Sign, Public or Semipublic Institution Sign, Temporary Contractor/Designer Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Vandergrift Borough vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Vandergrift Borough are regulated with specific requirements for brightness, animation, and message duration. Vandergrift Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Vandergrift Borough Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Vandergrift Borough, Pennsylvania sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Vandergrift Borough, Pennsylvania Sign Rules at a Glance

Vandergrift Borough, Pennsylvania regulates 12 sign types across 3 zoning districts. Freestanding Signs in the Commercial District, Industrial District zoning district are capped at 35 feet tall and 64 square feet per face, total of 128 square feet on all faces, with a Not closer than 15 feet to a street right-of-way setback (Sec. § 500-20E(2)(a), (2)(d), (2)(e)[1-2]). Most commercial signs in Vandergrift Borough require a permit.

Detailed Sign Ordinance Requirements for Vandergrift Borough, Pennsylvania

Sign Rules by Zoning District in Vandergrift Borough (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts512 feet (measured from the topmost part of the sign to the ground below)16 square feet per face
Commercial District, Industrial District635 feet (none may extend higher)100 square feet, but no greater than 10% of wall surface; minimum 20 square feet allowed
General Regulations For All Zones15 square feet

Zone-by-Zone Sign Requirements in Vandergrift Borough

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Property Identification Sign12 feet (measured from the topmost part of the sign to the ground below)2 square feet per face1 per property, or 2 if abutting two streetsApplied flat to principal structure, attached to a private lamppost or fence, or to a pole in the groundUnlock§ 500-20D(1), (6), (7), (8)
Temporary Real Estate Sign12 feet16 square feet per facePlaced upon property being offeredUnlock§ 500-20D(2), § 500-20C(5)(a)
Public or Semipublic Institution Sign12 feet16 square feet per faceUnlock§ 500-20D(3), (8), § 500-20C(6)(a)
Temporary Contractor/Designer Sign12 feet16 square feet per face1 per contractor/designerOn the property where contractor/designer is employedUnlock§ 500-20D(4), § 500-20C(5)(b)
Memorial Tablet and Governmental SignUnlock§ 500-20D(5)

Commercial District, Industrial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
All Signs Permitted in Residential Districts35 feet (none may extend higher)Unlock§ 500-20E(1)(a), § 500-20E(2)(d)
Freestanding Sign35 feet64 square feet per face, total of 128 square feet on all facesNot closer than 15 feet to a street right-of-way1 per propertyFront yard or side yard abutting a public street (not closer than 15 feet to street right-of-way)Unlock§ 500-20E(2)(a), (2)(d), (2)(e)[1-2]
Wall SignNot above the sills of second-floor windows or top of the parapet on 1-story buildings; no more than 35 feet above ground100 square feet, but no greater than 10% of wall surface; minimum 20 square feet allowedLocated between heads of ground floor windows/doors and sills of second floor windows or top of parapet; must follow façade continuity as approved by Building InspectorUnlock§ 500-20E(2)(b), (2)(d), (2)(e)[3]
Projecting Sign35 feet15 square feet per faceProtruding over sidewalk or public right-of-way, subject to code and safety standardsUnlock§ 500-20E(2)(c), (2)(d)
Sign on Marquee, Awning or Canopy Edge3 feet (edge height)Attached to/part of the edges of a marquee, retractable awning, or canopyUnlock§ 500-20E(1)(d)
Billboard35 feet25 feet from right-of-way/property lineIndustrial District only, set back at least 25 feet from street, highway, or property lineUnlock§ 500-20E(1)(c), (2)(d)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Garage, Yard or Porch Sale Sign5 square feetOn property where sale is occurringUnlock§ 500-20C(4)

Illumination rules, size formulas, and permit requirements for every sign type in Vandergrift Borough are available with a free PermitPal account.

Start free

Prohibited Signs in Vandergrift Borough

  • No person shall willfully or maliciously destroy, remove, deface, obliterate, or cover up any lamp, warning sign, or barricade erected by borough authorities or by any permitted persons on public property.
  • No animated signs, or signs illuminated by a flashing, pulsating or intermittent source are permitted, except for time-and-temperature indicators.
  • No signs lighted in such a manner as to create clear (hazardous) conditions on adjacent property or on an adjacent sidewalk or street.
  • No sign shall be placed upon the roof of a building or project above the top or beyond the end of a building wall.
  • No sign shall be located so as to block doors, fire escapes, operable windows, or access to them, nor shall a sign be attached to a fire escape.
  • No sign shall, by reason of location or message, create traffic confusion or any traffic hazard by obstructing any sight distances or by generally confusing motorists.
  • Projecting signs must be created from light-weight materials and must be designed and anchored to withstand a steady, horizontal wind pressure of at least 100 miles per hour.
  • Signs in excess of 30 sq. ft. and their structural supports must be made of noncombustible materials.
  • Where glass panels on any sign exceed three square feet in area, they shall be wired glass or shatterproof glass; otherwise glass areas shall be a minimum of one-quarter-inch-thick safety glass.
  • Signs must be located only on the property containing the use identified by the sign, except for billboards.

Exempt Signs in Vandergrift Borough

  • Real estate signs not exceeding 16 square feet in area do not require permits for erection.
  • Signs denoting designers and/or contractors when placed on property where the firm is doing work, limited to 16 square feet and removed when work is completed, do not require permits.
  • Signs or bulletin boards put up by public, charitable, or religious institutions on their own property require permits but no fees.
  • Temporary signs advertising special events of public, charitable, or religious institutions may be approved by Borough Council in other locations for up to 30 days.

Sign Plan & Submission Notes for Vandergrift Borough

  • A permit issued by the Zoning Officer is required before any sign may be erected, except for signs specifically exempted from permits.
  • Permit applications must include details such as owner information, location, drawings, size calculations, installation and anchoring details, and certification by a registered professional engineer when applicable.
  • A permit is required for replacement, enlargement, or moving of a sign, but not for repair of an existing sign.
  • Projecting, internally illuminated, or indirectly illuminated signs hanging over pedestrian or traffic ways require strict review by the Code Officer and certification by a professional engineer to ensure compliance with health, safety, and welfare standards.

Source: ecode360 municipal code