Sign Regulations in Verona Borough, Pennsylvania

Verona Borough, Pennsylvania has specific sign regulations covering 26 sign types across 4 zoning districts. Regulated sign types include Freestanding Sign, General Sign Construction and Placement Requirements, Temporary Sign (Public Interest). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Verona Borough, Pennsylvania

Sample Sign Requirements in Verona Borough

Sign TypeMax HeightMax AreaSetback
Freestanding SignNo portion closer than 10 feet from side property line.
General Sign Construction and Placement RequirementsSign must not exceed height limitations of zoning district; no sign above the cornice/gutter/roof line.
Identification Sign1 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Verona BoroughFull Coverage

Sign Types Covered

26

  • Freestanding Sign
  • General Sign Construction and Placement Requirements
  • Temporary Sign (Public Interest)
  • Identification Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Verona Borough

Frequently Asked Questions

Sign height limits in Verona Borough vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Verona Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Verona Borough, regulated sign types include Freestanding Sign, General Sign Construction and Placement Requirements, Temporary Sign (Public Interest), Identification Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

In Verona Borough, monument signs typically require a No portion closer than 10 feet from side property line. setback from property lines. Setbacks may increase near residential zones or intersections. Wall signs attached to buildings generally don't have setback requirements. Use PermitPal for location-specific setback data.

Digital and LED signs in Verona Borough are regulated with specific requirements for brightness, animation, and message duration. Verona Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Verona Borough Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Verona Borough, Pennsylvania sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Verona Borough, Pennsylvania Sign Rules at a Glance

Verona Borough, Pennsylvania regulates 26 sign types across 4 zoning districts. Freestanding Signs in the C District, LM District, LM-2 District zoning district are capped at 100 sq ft on either face (contiguous message area), with a 10 ft side property line minimum. setback (Sec. § 250-77B(2), § 250-77C(5), § 250-77D(1), (4), (5)). Most commercial signs in Verona Borough require a permit.

Detailed Sign Ordinance Requirements for Verona Borough, Pennsylvania

Sign Rules by Zoning District in Verona Borough (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones3Sign must not exceed height limitations of zoning district; no sign above the cornice/gutter/roof line.
Residential districts, Public and Private Recreation District630 sq ft
C District, LM District, LM-2 District4Per § 250-76 (see zone above for specific values)
Business district1414 ft50 sq ft

Zone-by-Zone Sign Requirements in Verona Borough(sample of 3 of 4 zones)

Residential districts, Public and Private Recreation District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Identification Sign1 sq ft1 per type/property (2 for corner lots; one per frontage)On property; only one per property, but may have two if abutting two or more streets (one per frontage).Unlock§ 250-76A(1), § 250-76B, § 250-76C, § 250-76D
For Sale or Rent Sign6 sq ft1 per type/property (2 for corner lots; one per frontage)On property; only one per property, but may have two if abutting two or more streets (one per frontage).Unlock§ 250-76A(2), § 250-76B, § 250-76C, § 250-76D
Public or Semipublic Institution Identification Sign30 sq ft1 per type/property (2 for corner lots; one per frontage)On property; only one per property, but may have two if abutting two or more streets (one per frontage).Unlock§ 250-76A(3), § 250-76B, § 250-76C, § 250-76D
Artisan Sign6 sq ft1 per type/property (2 for corner lots; one per frontage)On property; only one per property, but may have two if abutting two or more streets (one per frontage).Unlock§ 250-76A(4), § 250-76B, § 250-76C
Public Service or Public Safety SignUnlock§ 250-76A(5), § 250-76B
Nonconforming Use Identification Sign6 sq ft1 per type/property (2 for corner lots; one per frontage)On property; only one per property, but may have two if abutting two or more streets (one per frontage).Unlock§ 250-76B, § 250-76C

C District, LM District, LM-2 District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Identification Sign (Residential/Recreation Types)Per § 250-76 (see zone above for specific values)Unlock§ 250-77A(1)
Business or Industry Identification Sign - Wall SignGreater of 10% of wall area or 60 sq ft (per street frontage; max two).15-inch maximum projection from wall (including depth).Per building, 1 per business ground floorFlat to wall (not painted directly). Each street frontage (max two) treated as a separate wall.Unlock§ 250-77A(2), § 250-77B(1), § 250-77C(1), (2), (4), § 250-77D(2), § 250-77E(1)
Business or Industry Identification Sign - Window Sign (Upper/Basement)6 sq ft per business per wall surface1 per business per wall surfaceIn or on window (painted or affixed).Unlock§ 250-77C(3)
Freestanding Sign100 sq ft on either face (contiguous message area)10 ft side property line minimum.1 per propertyFastened to ground; must be in yard abutting street.Unlock§ 250-77B(2), § 250-77C(5), § 250-77D(1), (4), (5)

Business district

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Business Identification Sign (First Floor)2.5 ft50 sq ftMax 1 per facade per street; max 2 per buildingOn facade facing street, first floor commercial tenant.Unlock§ 250-77.1G(1)(b)[2], § 250-77.1L
Business Identification Sign (Basement/Upper Floors)2.5 ft12 sq ft1 per basement/upper floor businessOn first floor near entry to basement/upper floor space.Unlock§ 250-77.1G(1)(b)[1], § 250-77.1G(2)(g)
Trespassing/Private Number Sign4 sq ft2 per property (more if multiple street frontages)Freestanding; max two per property, or two per frontage if fronts more than one street.Unlock§ 250-77.1G(1)(d)
Architectural Statue6 ft1 per first floor commercial businessWithin 6 inches of storefront; not obstructing traffic.Unlock§ 250-77.1G(2)(a)
Ground Sign7 ft24 sq ftPermitted only if building's front wall is set back more than 10 ft from front lot line.Unlock§ 250-77.1G(2)(b)[1]
Pole Sign14 ft24 sq ftPermitted only if building's front wall is set back more than 10 ft from front lot line.Unlock§ 250-77.1G(2)(b)[2]
Wall Sign2.5 ft50 sq ftMounted/attached/painted flush to building. Only one sign face visible from outside.Unlock§ 250-77.1G(2)(e)
Sandwich Board SignAggregate 12 sq ft (max two boards)Max 2 per businessOn sidewalk; must not block sidewalk; must be removed after hours.Unlock§ 250-77.1H(3)

PermitPal covers all 4 zoning districts in Verona Borough — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Verona Borough — start free

Prohibited Signs in Verona Borough

  • No sign shall be erected, constructed, enlarged, altered, illuminated, or displayed except in accordance with the requirements of the sign ordinance and any applicable provisions of the Borough Zoning Ordinance and Building Code.
  • No sign shall be constructed, erected or placed within the right-of-way lines of any public highway or street except for official traffic signs or road signs by governmental agencies, or permitted projecting and temporary signs.
  • No sign or portion thereof shall extend beyond the roof of a building.
  • No sign shall exceed the height limitation for its zone/district, and no sign shall be placed upon a roof or project above the cornice/gutter line.
  • No animated signs, flashing, pulsating, or intermittent source-illuminated signs, or signs lighted to create glare on adjacent properties or streets shall be permitted.
  • No sign, excluding canopy, awning, and window signs, shall be constructed with non-durable materials.
  • No freestanding sign shall have more than two sides and all areas indicated as maximum are for one side only.
  • No sign shall impede the view of vehicle drivers using adjacent streets.
  • No sign, including parts, may extend beyond a property line into a public right-of-way except for certain flat wall signs which may extend up to 12 inches at least 10 feet above grade.
  • Signs advertising goods or services not sold or produced on the premises are prohibited.
  • No sign shall be illuminated that faces or partially faces an adjacent residentially zoned property.
  • All internally illuminated signs are prohibited, except as specifically permitted for marquee signs and (by conditional use) for neon signs.
  • No abandoned signs, animated signs, beacon lights, flashing signs, movable/changeable lettering signs, roof signs, pole signs, portable signs, signs painted on brick, or signs advertising for other locations (off-premises advertising) are permitted, except as allowed for temporary signs.
  • No person shall destroy, remove, deface, obliterate, or cover up any warning lamp, sign, or barricade erected by authorities on public rights-of-way.
  • Signs must be maintained in good repair, and dilapidated signs may be ordered repaired within 30 days or removed by order of the Zoning Officer.

Exempt Signs in Verona Borough

  • Flags or emblems of government, political, civic, philanthropic, educational, or religious organizations displayed on private property.
  • Signs placed by a governmental body, including but not limited to official traffic or directional devices, legal notices, instructional or regulatory signs, or notices by public officers or employees.
  • Historic signs designated by Borough Council, including ghost signs, with restoration/preservation allowed regardless of compliance, but subject to Council requirements/restrictions.
  • Incidental signs displayed inside a window of a commercial establishment advertising special sales, accepted credit cards, or as required by law or ordinance.

Sign Plan & Submission Notes for Verona Borough

  • Separate permits are required for all signs with a gross area of more than six square feet if erected as separate projects not included in the construction of a building.
  • Persons desiring to erect a sign, whether as a separate project or part of other construction requiring a permit, must apply to the Zoning Officer and submit a plan indicating the sign location, dimensions to property lines, sign dimensions (including top and bottom above ground), construction details, materials, and method of attachment.
  • For ground signs in the business district, the sign permit application must include a site plan indicating the location of the sign.
  • In the business district, the sign permit application (in addition to any other required permit) must include a current photograph of the property, an illustration of the building facade showing the proposed sign, a scaled drawing of the sign with details of size, materials, colors, lighting, lettering and attachment, and the type of illumination (if any).
  • All sign applications are reviewed by the Zoning Officer for compliance with the sign ordinance purposes and intent.
  • Signs not conforming to the ordinance must be brought into compliance or removed immediately if altered in any way.

Source: ecode360 municipal code