Questions? Call us at (262) 218-2915

Sign Regulations in Vanport Township, Pennsylvania

Vanport Township, Pennsylvania has specific sign regulations covering 18 sign types across 5 zoning districts. Regulated sign types include Property Identification Sign, Temporary Real Estate Sign, Public Institution Identification Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Vanport Township, Pennsylvania

Sample Sign Requirements in Vanport Township

Sign TypeMax HeightMax AreaSetback
Property Identification Sign12 ft measured from ground to top of sign2 sq ft per faceNot listed
Temporary Real Estate Sign12 ft measured from ground to top of sign12 sq ft per faceNot listed
Public Institution Identification Sign12 ft measured from ground to top of sign24 sq ft per faceNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Vanport TownshipFull Coverage

Sign Types Covered

18

  • Property Identification Sign
  • Temporary Real Estate Sign
  • Public Institution Identification Sign
  • Temporary Designer/Contractor Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Vanport Township

Frequently Asked Questions

In Vanport Township, the height limit for Freestanding Sign in the Commercial and Industrial Districts is 35 ft above ground. The height limit for Wall Sign in the Commercial and Industrial Districts is 35 ft above ground. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Vanport Township require a permit. From the submission notes on this page: No indication is given that a master sign plan or variance meeting is required for general signage. Run a code check for an exact address to see the permit requirements for that zone.

Vanport Township's sign code covers 18 sign types, including Property Identification Sign, Temporary Real Estate Sign, Public Institution Identification Sign, and Temporary Designer/Contractor Sign. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Holiday decorations. The full list is on this page.

In Vanport Township, Billboard (Industrial District only) in the Commercial and Industrial Districts must be set back 25 feet from any street or property line (Sec. 180-25E(1)(c)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Vanport Township's sign ordinance that cover digital, changing, or flashing signs: Animated signs, whether revolving or containing any moving parts or activated by wind movement, are prohibited except for time and temperature indicators. Signs illuminated by a flashing or pulsating source are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Vanport Township Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Vanport Township, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Vanport Township, Pennsylvania Sign Rules at a Glance

Vanport Township, Pennsylvania regulates 18 sign types across 5 zoning districts. Billboards (Industrial District only) in the Commercial and Industrial Districts are capped at 100 sq ft per face, set back 25 feet from any street or property line (Sec. 180-25E(1)(c)). Most commercial signs in Vanport Township require a permit.

Detailed Sign Ordinance Requirements for Vanport Township, Pennsylvania

Sign Rules by Zoning District in Vanport Township (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential and Conservation Districts512 ft measured from ground to top of sign24 sq ft per faceNot listed
Commercial and Industrial Districts835 ft above ground100 sq ft per faceNot listed
Industrial District1Not listed100 sq ft per faceNot listed
Residential Zone Districts512 ft measured from ground to top of sign24 sq ft per faceNot listed
General Regulations For All Zones4Not listed48 sq ftNot listed

Zone-by-Zone Sign Requirements in Vanport Township(sample of 3 of 5 zones)

Residential and Conservation Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Property Identification Sign12 ft measured from ground to top of sign2 sq ft per faceNot listedNot listed1 per property; 2 for corner properties (one per street)Applied flat to the principal structure, attached to a private lamppost or fence, or to a pole in the groundNot listedUnlock§180-25D(1)(a), §180-25D(2), §180-25D(3), §180-25D(4)
Temporary Real Estate Sign12 ft measured from ground to top of sign12 sq ft per faceNot listedNot listed1 per property; 2 for corner properties (one per street)Placed upon the property being offeredNot listedUnlock§180-25D(1)(b), §180-25D(2), §180-25D(3), §180-25D(4)
Public Institution Identification Sign12 ft measured from ground to top of sign24 sq ft per faceNot listedNot listed1 per property; 2 for corner properties (one per street)On same property as institutionNot listedUnlock§180-25D(1)(c), §180-25D(2), §180-25D(3), §180-25D(4), §180-25C(6)(a)
Temporary Designer/Contractor Sign12 ft measured from ground to top of sign8 sq ft per faceNot listedNot listedOne per designer or contractorOn property where work is being performedNot listedUnlock§180-25D(1)(d), §180-25D(2), §180-25D(3), §180-25D(4), §180-25C(5)(b)
Memorial Tablet or Governmental SignNot listedNot listedNot listedNot listedNot listedOn propertyNot listedUnlock§180-25D(1)(e), §180-25B(4)(a), (b)

Commercial and Industrial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
All signs permitted in Residential Zone DistrictsNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§180-25E(1)(a)
Business/Industry Identification SignNot listedNot listedNot listedNot listedNot listedOn same property as business or industryNot listedUnlock§180-25E(1)(b)
Billboard (Industrial District only)Not listed100 sq ft per faceNot listed25 feet from any street or property lineNot listedIndustrial District, 25 ft set back from any street or property lineNot listedUnlock§180-25E(1)(c)
Freestanding Sign35 ft above ground48 sq ft per face; 96 sq ft total area all facesNot listedNot listed1 per propertyMay only be placed in yards abutting a public street; must not protrude over sidewalk or public right-of-wayNot listedUnlock§180-25E(3)(a), §180-25B(3), §180-25E(3)(d)
Wall Sign35 ft above ground100 sq ft or 10% of wall area, whichever is less; minimum 20 sq ft permittedNot listedNot listedNot listedMounted flat to wallNot listedUnlock§180-25E(3)(b), §180-25E(3)(d)
Projecting Sign35 ft above ground15 sq ft per faceNot listedNot listedNot listedAttached to wall of building. Shall not protrude over sidewalk or public right-of-wayNot listedUnlock§180-25E(3)(c), §180-25E(3)(d)
Marquee/Awning/Canopy Sign35 ft above groundNot listedNot listedNot listedNot listedEdges of a marquee, retractable awning or canopyNot listedUnlock§180-25E(2), §180-25E(3)(d)
Aggregate Sign Limitation (All Property)Not listed100 sq ft total for all signs on all faces on any propertyNot listedNot listedNot listedOn propertyNot listedUnlock§180-25E(3)(e)

Residential Zone Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Property Identification Sign12 ft measured from ground to top of sign2 sq ft per faceNot listedNot listed1 per property; 2 for corner properties (one per street)Applied flat to the principal structure, attached to a private lamppost or fence, or on a pole in groundNot listedUnlock§180-25D(1)(a), §180-25D(2), §180-25D(3), §180-25D(4)
Temporary Real Estate Sign12 ft measured from ground to top of sign12 sq ft per faceNot listedNot listed1 per property; 2 for corner properties (one per street)Placed upon the property being offered for sale/rental/leaseNot listedUnlock§180-25D(1)(b), §180-25D(2), §180-25D(3), §180-25D(4)
Public Institution Identification Sign12 ft measured from ground to top of sign24 sq ft per faceNot listedNot listed1 per property; 2 for corner properties (one per street)On same property as institutionNot listedUnlock§180-25D(1)(c), §180-25D(2), §180-25D(3), §180-25D(4), §180-25C(6)(a)
Temporary Designer/Contractor Sign12 ft measured from ground to top of sign8 sq ft per faceNot listedNot listedOne per designer or contractorOn property where work is being performedNot listedUnlock§180-25D(1)(d), §180-25D(2), §180-25D(3), §180-25D(4), §180-25C(5)(b)
Memorial Tablet or Governmental SignNot listedNot listedNot listedNot listedNot listedOn propertyNot listedUnlock§180-25D(1)(e), §180-25B(4)(a), (b)

PermitPal covers all 5 zoning districts in Vanport Township. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Vanport Township

  • Animated signs, whether revolving or containing any moving parts or activated by wind movement, are prohibited except for time and temperature indicators.
  • Signs illuminated by a flashing or pulsating source are prohibited.
  • No strings of bare bulbs are permitted.
  • Signs may not be lighted so as to create glare conditions on adjacent or nearby properties or streets or to confuse motorists.
  • No sign shall be placed upon the roof of a building or so as to project above the top or beyond the ends of a building wall.
  • Signs advertising a business that has moved or closed must be removed within 30 days of termination.
  • Political candidacy signs must be freestanding and are prohibited from being placed on utility poles.

Exempt Signs in Vanport Township

  • Any sign erected by the Board of Commissioners or any state or federal agency.
  • Memorial tablets erected by public or nonprofit organizations.
  • Directional or informational signs on a property, provided they are strictly functional, contain no advertising, and are approved by the Zoning Officer.
  • Holiday decorations.

Sign Plan & Submission Notes for Vanport Township

  • A permit issued by the Zoning Officer is required before any sign may be erected, except for those exempted (per §180-25C(1) and §180-25C(5)).
  • A permit is required for the replacement, enlargement or moving of a sign, but not for the repair of an existing sign (per §180-25C(3)).
  • No indication is given that a master sign plan or variance meeting is required for general signage.

Source: ecode360 municipal code