Questions? Call us at (262) 218-2915

Sign Regulations in Cedar Hill, Texas

Cedar Hill, Texas has specific sign regulations covering 46 sign types across 8 zoning districts. Regulated sign types include Wall Sign (Attached), Wall Sign - Special Exception (Buildings ≥30,000 sf and ≥100 ft street setback), Window Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 24, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Cedar Hill, Texas

Sample Sign Requirements in Cedar Hill

Sign TypeMax HeightMax AreaSetback
Wall Sign (Attached)Not listedUp to 100 sq ft per sign for sign height ≤36 ft; may increase by 4 sq ft per ft above 36 ft per Sec. 4-244(2)(b)2Not listed
Wall Sign - Special Exception (Buildings ≥30,000 sf and ≥100 ft street setback)Not listed7.5% of front façade area for the first sign (then reduced by 0.5% per additional sign)Building setback from street must be ≥100 ft to use this exception.
Window SignNot listedUp to 40% of window area per façadeNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Cedar HillFull Coverage

Sign Types Covered

46

  • Wall Sign (Attached)
  • Wall Sign - Special Exception (Buildings ≥30,000 sf and ≥100 ft street setback)
  • Window Sign
  • Canopy Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Cedar Hill

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Cedar Hill, the height limit for Freestanding Sign (Frontage along Hwy 67) in the Neighborhood service district (NS) and other zoning districts is 40 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Cedar Hill require a permit. From the submission notes on this page: A sign permit is required for most signs; applications must include design drawings, plot plan showing placement, and a lighting/illumination schematic. Signs exceeding 10 feet in height must be certified by a licensed professional engineer. Run a code check for an exact address to see the permit requirements for that zone.

Cedar Hill's sign code covers 46 sign types, including Wall Sign (Attached), Wall Sign - Special Exception (Buildings ≥30,000 sf and ≥100 ft street setback), Window Sign, and Canopy Sign. Most commercial signs need a permit. The ordinance lists 13 exemptions. One of them: Residential district signs with dimensions below those in Attachment B are exempt from permit. The full list is on this page.

This page doesn't list a single setback distance for signs in Cedar Hill. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Cedar Hill's sign ordinance that cover digital, changing, or flashing signs: Signs with animation, moving parts, or flashing/blinking lights are prohibited (time and temperature signs excepted). Illuminated signs that produce visual discomfort or glare to viewers on other properties or adjacent streets are prohibited; moving, flashing, intermittently lighted, changing color, beacon, or revolving illumination is not allowed. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Cedar Hill Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Cedar Hill, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Cedar Hill, Texas Sign Rules at a Glance

Cedar Hill, Texas regulates 46 sign types across 8 zoning districts. Temporary Real Estate Signs (Vacant/undeveloped land ≥5 acres) are capped at 8 ft tall and 100 sq ft. Most commercial signs in Cedar Hill require a permit.

Detailed Sign Ordinance Requirements for Cedar Hill, Texas

Sign Rules by Zoning District in Cedar Hill (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones22Flagpole ≤30 ftUp to 100 sq ft per sign for sign height ≤36 ft; may increase by 4 sq ft per ft above 36 ft per Sec. 4-244(2)(b)2Not listed
Rural Residential (RR), Single-family residential-estate - 43,560 square-foot lots (SF-E), Single-family residential - 22,000 square-foot lots (SF-22), Single-family residential - 15,000 square-foot lots (SF-15), Single-family residential - 10,000 square-foot lots (SF-10), Single-family residential - 8,500 square-foot lots (SF-8.5), Single-family residential - 7,000 square-foot lots (SF-7), Single-family attached residential (townhomes) (TH)2≤20 ft≤64 sq ftNot listed
Multiple-family dwelling district (MF), PD-MF1≤20 ft≤40 sq ftNot listed
Neighborhood service district (NS), Local retail district (LR), Old Town District (OT), Commercial District (C), Corporate campus district (CC), Industrial park district (IP), Industrial district (I)4≤40 ft≤240 sq ftNot listed
Uptown overlay district (UT)9Single line copy: 36 in (internally lit); two+ lines total: 54 in≤64 sq ft (may increase to 100 sq ft with increased setback to 15 ft)Not listed
Commercial District (C), Corporate campus district (CC), Industrial park district (IP), Industrial district (I), Neighborhood service district (NS), Local retail district (LR), Old Town District (OT), Uptown overlay district (UT) [General Attached/Temporary Rules]4≤8 ft≤100 sq ft per sign at ≤36 ft; increases as described above for higher mountingNot listed
Planned development (PD)3≤20 ft (non-residential use)Per Attachment A non-residential table based on Hwy 67 proximityNot listed
High Pointe overlay district (HP)1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Cedar Hill(sample of 3 of 8 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Non-Commercial Sign (Temporary Detached)Per applicable temporary sign limits in Attachment BPer applicable temporary sign limits in Attachment B for the zoning of the siteNot listedPer Attachment BPer Attachment BAllowed wherever commercial signs are allowed; must be located, designed, and constructed to same specs as authorized commercial sign.Not listedUnlockSec. 4-240; Attachment B
Temporary Real Estate Sign (Residential property)≤6 ft (Attachment B row for residential lot occupied by single family dwelling)≤8 sq ftNot listedNone specified for temporary1 per lotOn the property being sold or rented.Not listedUnlockSec. 4-242(1)(b); Attachment B (Lot occupied by a single family dwelling)
Temporary Real Estate Sign (Non-residential districts; occupied by a non-residential structure)≤10 ft≤32 sq ftNot listedNone specified1 per street frontageOn the property being sold or rented.Not listedUnlockAttachment B (Occupied by a non-residential structure; Non-residential districts)
Temporary Real Estate Sign (Vacant/undeveloped land ≥5 acres)≤8 ft≤100 sq ftNot listedNone1 per street frontageOn vacant/undeveloped land ≥5 acres.Not listedUnlockAttachment B (Vacant/undeveloped land, ≥5 acres, all districts)
Temporary Real Estate Sign (Vacant/undeveloped land <5 acres, non-single family and multifamily districts)≤8 ft≤32 sq ftNot listedNone1 per street frontageOn vacant/undeveloped land <5 acres (non-single family and multifamily districts).Not listedUnlockAttachment B
Temporary Real Estate Sign (Vacant/undeveloped land <5 acres, residential districts)≤6 ft≤8 sq ftNot listedNone1 per street frontageOn vacant/undeveloped land <5 acres (residential districts).Not listedUnlockAttachment B
Temporary Development Sign (Land development, non-residential districts)≤20 ft≤100 sq ftNot listedNone1 per lotOn non-residential development site.Not listedUnlockAttachment B
Temporary Construction Sign (Residential districts, development sign)≤20 ft≤100 sq ftNot listedNone1 per developmentOn residential development site (development-wide sign).Not listedUnlockAttachment B (Building construction; residential districts, development)

Neighborhood service district (NS), Local retail district (LR), Old Town District (OT), Commercial District (C), Corporate campus district (CC), Industrial park district (IP), Industrial district (I)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Frontage along Hwy 67)≤40 ft≤240 sq ftNot listedMinimum setback 0 ft from property line1 sign per each 450 ft of lot road frontage; minimum sign spacing of 225 ft (Attachment A note F)Lots occupied by a non-residential building with frontage along Hwy 67.Not listedUnlockAttachment A (All non-single family and non-multifamily zoning districts (E) – Frontage along Hwy. 67; notes E, F, G); Sec. 4-244(1)–(2)
Freestanding Sign (Frontage along street other than Hwy 67, and within 200 ft of Hwy 67)≤40 ft≤240 sq ftNot listedMinimum setback 8 ft1 sign per each 450 ft of lot road frontage; minimum sign spacing of 225 ft (Attachment A note F)Lots occupied by a non-residential building with frontage on a street other than Hwy 67 and within 200 ft of Hwy 67.Not listedUnlockAttachment A (All non-single family and non-multifamily zoning districts (E) – within 200 ft of Hwy. 67; notes E, F, G)
Freestanding Sign (Frontage along street other than Hwy 67, 201–500 ft from Hwy 67)≤30 ft≤180 sq ftNot listedMinimum setback 8 ft1 sign per each 450 ft of lot road frontage; minimum sign spacing of 225 ft (Attachment A note F)Lots occupied by a non-residential building with frontage on a street other than Hwy 67 and >201 ft but <500 ft from Hwy 67.Not listedUnlockAttachment A (All non-single family and non-multifamily zoning districts (E) – 201–500 ft from Hwy. 67; notes E, F, G)
Freestanding Sign (Frontage along street other than Hwy 67, more than 500 ft from Hwy 67)≤20 ft≤64 sq ft (may increase to 100 sq ft with increased setback)Not listedMinimum setback 8 ft (may increase area to 100 sq ft if setback increased to 15 ft per note B)1 sign per each 450 ft of lot road frontage; minimum sign spacing of 225 ft (Attachment A note F)Lots occupied by a non-residential building with frontage on a street other than Hwy 67 and more than 500 ft from Hwy 67.Not listedUnlockAttachment A (All non-single family and non-multifamily zoning districts (E) – >500 ft from Hwy. 67; note B, E, F, G)

Uptown overlay district (UT)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (UT overlay – lots NOT between Clark Rd and Belt Line Rd)≤8 ft≤64 sq ft (may increase to 100 sq ft with increased setback to 15 ft)Not listedMinimum setback 8 ft; may increase area to 100 sq ft if setback increased to 15 ft1 sign per each 450 ft of lot road frontage; minimum sign spacing of 225 ft (Attachment A note F)Permanent detached sign within Uptown Overlay (UT) and not located between Clark Road and Belt Line Road.Not listedUnlockAttachment A note (A), (E), (F), (G)
Wall Sign (Main Storefront Sign – Uptown Village property 305 W FM 1382)Single line copy: 36 in (internally lit); two+ lines total: 54 inCalculated as a box enclosing all letters/numbers/symbols, including spacing; 1.5 sq ft per linear foot of leased storefrontMax length: 75% of storefront length or 36 ft, whichever is lessNot listedOne per building front elevation per tenantOne sign per building front elevation (storefront); may be on sign band.Not listedUnlockUptown Village Sign Criteria – Location and Size of Signs; Sign Specifications; Miscellaneous Sign Requirements
Wall Sign - Option 1 (Logo-only on sign band; canopy entrance sign)Canopy entrance sign: 30 inLogo-only band: 2 sq ft per linear foot of frontage; canopy sign: 30 in × 120 inCanopy entrance sign: 120 inNot listedLogo band plus one canopy entrance sign per tenantLogo on sign band; canopy sign at/on/near entrance canopy constructed of permanent materials.Not listedUnlockUptown Village Sign Criteria – Location and Size of Signs (Exception for logo-only on sign band)
Blade Sign (Projecting, Uptown Village property only)Bottom of sign ≥7 ft above finished floor≤12 sq ft per blade face (excluding bracket); total ≤24 sq ft for two signsNot listedNot listedMinimum one per elevation; maximum two per tenant; total blade area ≤24 sq ft for two signsMounted within tenant storefront area; perpendicular to storefront; extend no more than 4 ft in front of tenant lease line; minimum 3 ft from neutral piers; cannot attach to landlord’s neutral piers/columns/surfaces.Not listedUnlockUptown Village Sign Criteria – Blade Sign
Canopy Graphics (Uptown Village property only)Not listedGraphics on canopies should not exceed 30% of canopy areaNot listedNot listedNot listedOn entrance canopy or window canopies.Not listedUnlockUptown Village Sign Criteria – Canopy Graphics
Menu Board Sign (Uptown Village storefront/common area)Not listedNot listedNot listedIf free-standing, within 5 ft of entranceNot listedInstalled on the storefront or permanently as a free-standing sign in the common area if within 5 ft of the entrance.Not listedUnlockUptown Village Sign Criteria – Menu Board Signs
Open/Closed Sign (Uptown Village storefront)Not listed≤15 in × 20 in overallNot listedNot listed≤1 per tenantWithin 5 ft horizontally of tenant entrance or installed on entry door.Not listedUnlockUptown Village Sign Criteria – Open/Closed Sign
Service Entrance Door Sign (Uptown Village)Copy height 3 inNot listedNot listedNot listedNot listedInstalled on tenant rear service door.Not listedUnlockUptown Village Sign Criteria – Service Entrance Door Sign

PermitPal covers all 8 zoning districts in Cedar Hill. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Cedar Hill

  • Signs with animation, moving parts, or flashing/blinking lights are prohibited (time and temperature signs excepted).
  • Advertising by means of balloons or other inflated signs anchored to the ground, a building, or other structure is prohibited.
  • Illuminated signs that produce visual discomfort or glare to viewers on other properties or adjacent streets are prohibited; moving, flashing, intermittently lighted, changing color, beacon, or revolving illumination is not allowed.
  • Lights on signs that are not effectively shielded so that beams or rays are directed at roadways causing glare or impairing drivers are prohibited.
  • Signs using forms, words, colors, or lights that imitate emergency signs or signals are prohibited.
  • Searchlights are prohibited.
  • No sign, paper, paint, stencil, or marking may be placed on sidewalks, curbs, gutters, or streets.
  • Signs may not be located on public property or attached to public utility poles or structures, street lights, trees, fences, fire hydrants, bridges, curbs, sidewalks, park benches, or other public property.
  • Off‑premises temporary real estate directional signs are prohibited.
  • No sign may be located on or project over the roof of a building.
  • No sign may be painted or attached to the outside of a fence, railing, or a non‑structural wall (except for nameplate or protective signs).
  • Signs that move by any means are prohibited.
  • Exposed luminescent inert gas tubes (e.g., neon, argon, krypton) visible from the exterior are prohibited except as attached signs that conform to all sign regulations.
  • Obscene, indecent, or immoral content on any sign is unlawful.
  • Vehicular signs are prohibited except for governmental vehicles and vehicles whose primary purpose is not sign display, where the sign is integral to the vehicle and the vehicle is not used primarily as a static advertising display.
  • Projecting signs are prohibited.
  • Decorative flags and pennants are prohibited.
  • Billboards are prohibited.
  • New off‑premises signs are prohibited, including new off‑premises CEVMS and conversions of existing off‑premises signs to CEVMS.

Exempt Signs in Cedar Hill

  • For‑sale or for‑lease signs on the property: undeveloped property signs up to 32 sq ft (allowed for up to 1 year).
  • Residential property sale/rental signs up to 8 sq ft and nameplates up to 1 sq ft.
  • Signs erected for protection of life or property, including utility information.
  • Signs not visible from public roads or not intended to be seen from public roads.
  • Official signs.
  • Ranch or farm name signs up to 32 sq ft.
  • Directional or traffic signs.
  • Political campaign signs (not regulated under the sign chapter; governed by other code provisions).
  • Seasonal decorations and displays from November 1 through the first Monday after January 1.
  • National or state flags up to 40 sq ft on flagpoles up to 30 ft (larger flags/poles require an exception).
  • Residential district signs with dimensions below those in Attachment B are exempt from permit.
  • Kiosk signs.
  • Mural signs.

Sign Plan & Submission Notes for Cedar Hill

  • A sign permit is required for most signs; applications must include design drawings, plot plan showing placement, and a lighting/illumination schematic. Signs exceeding 10 feet in height must be certified by a licensed professional engineer.
  • If the building official denies a sign permit, the applicant may appeal to the Sign Review Board of Appeals within 10 days; the board will act within 21 days.
  • Variances and exceptions are heard by the Building Appeals and Advisory Board; the board may grant variances for height, area, setbacks, materials, and number of signs based on hardship criteria.
  • Letter/logo heights exceeding the table maximums for attached signs require approval by the Sign Review Board of Appeals.
  • Multi‑tenant detached signs must be approved by the Sign Board (Attachment A note E).
  • CEVMS (onsite) approval requires an application reviewed by the Building Appeals and Advisory Board with a public hearing and recommendation to City Council; City Council conducts a public hearing and decides. Criteria include compliance with sign height/area/setbacks, minimum 730,000 sq ft of development within a minimum of 74 acres, frontage/visibility from Highway 67 or a parallel street, no audible sound, and a minimum two‑mile spacing from other CEVMS.
  • Kiosk signs may be installed only under a city license agreement; prior to installation, a sign location map must be approved by the code enforcement supervisor and building official.

Source: municode municipal code