Sign Regulations in Fate, Texas
Fate, Texas has specific sign regulations covering 21 sign types across 5 zoning districts. Regulated sign types include Utility Pole Banner Sign, Project Development Sign, Kiosk Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Fate, Texas
Sample Sign Requirements in Fate
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | Wall height up to 20 ft | 15% of wall surface (20% in I-30 Corridor) | Not listed |
| Monument Sign | 8 ft | 80 sq ft | 10 ft (15 ft in I-30 Corridor) |
| Window Sign | Not listed | 10% aggregate window area per façade | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
21
- Utility Pole Banner Sign
- Project Development Sign
- Kiosk Sign
- Wall Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Fate
Other Cities in Texas
Frequently Asked Questions
In Fate, the height limit for Utility Pole Banner Sign is 10 ft (Sec. 36-8.2.13). The height limit for Wall Subdivision Sign is 6 ft (Sec. 36-8.2.9). Maximum sign heights range from 10 ft to 100 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Fate require a permit. From the submission notes on this page: A site plan is required with the sign permit application, showing street frontage, property lines, easements, location of sign, relationship to points of ingress/egress, and relationship to other signs within 60 feet of the proposed sign. Run a code check for an exact address to see the permit requirements for that zone.
Fate's sign code covers 21 sign types, including Utility Pole Banner Sign, Project Development Sign, Kiosk Sign, and Wall Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Replacement of letters on non-illuminated wall signs with identical letters (same area, shape, color) for which a permit for the original sign was obtained. The full list is on this page.
In Fate, Freestanding Subdivision Sign must be set back 10 ft (Sec. 36-8.2.8). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Fate's sign ordinance that cover digital, changing, or flashing signs: Flashing signs and moving lights integral to a sign or external, intended to draw attention, are prohibited. LED signs (wall-mounted or freestanding) are prohibited in the Old Town Core (OTC) District. Changeable electronic copy signs are prohibited in the OTC District. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Fate Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Fate, Texas, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Fate, Texas Sign Rules at a Glance
Fate, Texas regulates 21 sign types across 5 zoning districts. Model Home Signs are capped at 5 ft tall and 40 sq ft, with a 10 ft setback (Sec. 36-8.2.11). Most commercial signs in Fate require a permit.
Detailed Sign Ordinance Requirements for Fate, Texas
Sign Rules by Zoning District in Fate (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 17 | 100 ft | 100 sq ft | Not listed |
| I-30 Corridor | 1 | 30 ft | 250 sq ft sign copy (min 25% of each face free of copy) | Not listed |
| RE, R-1, R-2, R-3, R-4, MH, MUT, NT | 7 | 10 ft | 50 sq ft cumulative area per Table 8.2.7-1 | Not listed |
| NC, GC, INV, IND, MU, PP, INS | 4 | 10 ft | 184 sq ft cumulative per Table 8.2.7-1 | Not listed |
| OTC, Old Town Core (OTC) District | 11 | 100 ft | 100 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Fate(sample of 3 of 5 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Wall height up to 20 ft | 15% of wall surface (20% in I-30 Corridor) | Not listed | Not listed | See Additional Requirements | Attached to building wall; up to three sides | Not listed | Unlock | Sec. 36-8.2.3 |
| Monument Sign | 8 ft | 80 sq ft | Not listed | 10 ft (15 ft in I-30 Corridor) | See additional requirements | Within landscape area at property line, not in right-of-way | Not listed | Unlock | Sec. 36-8.2.4 |
| Incidental Sign | 8 ft | Variable by zone (e.g., 50-184 sq ft cumulative) | Not listed | See Table 8.2.7-1, 50 ft min spacing | Number and cumulative area varies by zone; baseline totals apply | At entrances or exits on property | Not listed | Unlock | Sec. 36-8.2.7 and Table 8.2.7-1 |
| Freestanding Subdivision Sign | 6 ft | 50 sq ft | Not listed | 10 ft | See additional requirements | At subdivision entry, on site | Not listed | Unlock | Sec. 36-8.2.8 |
| Wall Subdivision Sign | 6 ft | 50 sq ft | Not listed | Not listed | See additional requirements | On masonry screening wall or entry feature at subdivision periphery | Not listed | Unlock | Sec. 36-8.2.9 |
| Model Home Sign | 5 ft | 40 sq ft | Not listed | 10 ft | 1 per homebuilder per development (≤500 lots); 2 (>500 lots) | At model home, removal required after 4 years or conversion | Not listed | Unlock | Sec. 36-8.2.11 |
| Utility Pole Banner Sign | 10 ft | 12 sq ft | Not listed | Min 8 ft clearance from ground/sidewalk | 2 per pole, up to 50% of poles | Attached to utility poles within development | Not listed | Unlock | Sec. 36-8.2.13 |
| Inflatable Sign | 15 ft (if on building, max building height allowed by zoning district) | 15 ft diameter (height/width/depth) | 15 ft | Not listed | 2 per occupant/tenant | On ground, building, or similar structure | Not listed | Unlock | Sec. 36-8.3.5 |
RE, R-1, R-2, R-3, R-4, MH, MUT, NT
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Incidental Sign (Residential/Mixed/NT) | 8 ft | 50 sq ft cumulative area per Table 8.2.7-1 | Not listed | Not listed | Max 8 per development | Entrances/exits at property | Not listed | Unlock | Sec. 36-8.2.7, Table 8.2.7-1 |
| Freestanding Subdivision Sign | 6 ft | 50 sq ft | Not listed | 10 ft | See General Regulations | Residential subdivision entrance | Not listed | Unlock | Sec. 36-8.2.8 |
| Wall Subdivision Sign | 6 ft | 50 sq ft | Not listed | Not listed | See General Regulations | On subdivision wall | Not listed | Unlock | Sec. 36-8.2.9 |
| Model Home Sign | 5 ft | 40 sq ft | Not listed | 10 ft | See additional requirements | At model home | Not listed | Unlock | Sec. 36-8.2.11 |
| Project Development Sign | 10 ft | 50 sq ft | Not listed | Not listed | See General Regulations | Developing tract (temporary, see removal timeline) | Not listed | Unlock | Sec. 36-8.2.10 |
| Kiosk Sign | 8 ft | 16 sq ft | Not listed | Not listed | See additional requirements | Guidance/directional signs on site | Not listed | Unlock | Sec. 36-8.2.12 |
| Utility Pole Banner Sign | 10 ft | 12 sq ft | Not listed | Min 8 ft clearance from ground | See additional requirements | On utility poles | Not listed | Unlock | Sec. 36-8.2.13 |
OTC, Old Town Core (OTC) District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Monument Sign | 8 ft | 80 sq ft | Not listed | As in Sec. 8.2.4 | See Sec. 8.2.4 | At property/street frontage | Not listed | Unlock | Sec. 36-8.5.2, 8.2.4, 8.5.3-8.5.4 |
| Wall Sign | Up to 20 ft wall height | See Sec. 8.2.3 – 15% of wall (20% if also I-30) | Not listed | Not listed | See Additional Requirements | Building wall façade | Not listed | Unlock | Sec. 36-8.5.2, 8.2.3, 8.5.3 |
| Incidental Sign (OTC) | 8 ft | 80 sq ft cumulative per Table 8.2.7-1 | Not listed | Not listed | Max per Table 8.2.7-1 | Entrances/exits at property | Not listed | Unlock | Sec. 36-8.5.2, 8.2.7, Table 8.2.7-1 |
| Utility Pole Banner Sign | 10 ft | 12 sq ft | Not listed | Min 8 ft clearance from ground | See additional requirements | On utility poles | Not listed | Unlock | Sec. 36-8.5.2, 8.2.13 |
| Sidewalk Sign | 4 ft | 10 sq ft | Not listed | Not listed | 2 per ground floor entrance | Within 5 ft of primary entrance (non-res uses); on sidewalk by entrance | Not listed | Unlock | Sec. 36-8.5.2, 8.3.2 |
| Banner Sign | 12 ft (ground); 10 ft (wall) | 100 sq ft | Not listed | Not listed | 2 per occupant/tenant | Attached to wall or ground | Not listed | Unlock | Sec. 36-8.5.2, 8.3.3 |
| Inflatable Sign | 15 ft (if on building, max building height allowed by zoning district) | 15 ft diameter (height/width/depth) | 15 ft | Not listed | 2 per occupant/tenant | On ground, building, or similar structure | Not listed | Unlock | Sec. 36-8.5.2, 8.3.5 |
| Balloon Sign | 100 ft | 5 ft diameter (balloon) | Not listed | Not listed | 20 per occupant/tenant | Tethered to ground | Not listed | Unlock | Sec. 36-8.5.2, 8.3.6 |
PermitPal covers all 5 zoning districts in Fate. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Fate
- Pole signs, portable signs, marquee signs, ground signs, roof signs, bandit signs, and any signs attached to trees are prohibited.
- Permanent signs are prohibited in single-family residential zoning districts or uses except those signs that are typical and common to single-family residential uses (generally signs to be removed within a specific limited time or subdivision entry signs).
- Any sign attached, affixed, painted, or placed upon any vehicle, trailer, or mobile structure used for advertising is prohibited from being parked along a right-of-way or vicinity for longer than 30 minutes in any 24-hour period.
- Any non-public sign located within public rights-of-way or on City property without City approval is prohibited.
- Manual changeable copy signs are prohibited.
- Ground-lighted signs and signs lighted in an upward direction are prohibited.
- Neon lighting may only be approved by Special Sign Permit.
- Flashing signs and moving lights integral to a sign or external, intended to draw attention, are prohibited.
- Sign color must be neutral (neon or bright colors may only be approved by Special Sign Permit).
- Box or banner wall signs are prohibited.
- Painted wall signs depicting a business name or logo require a Special Sign Permit.
- Off-premises advertising signs (billboards) are prohibited.
- No person shall keep or permit any sign in a dilapidated or deteriorated condition as defined (i.e., illegible, broken, unsafe, etc.).
- Signs in violation of wind loading or building code requirements are prohibited.
- No sign shall be erected, replaced, altered, or located without securing a permit.
- No sign may obstruct or interfere with public safety or visibility of sight triangles, pedestrians, or vehicles.
- Signs cannot be located in a right-of-way or public easement.
- LED signs (wall-mounted or freestanding) are prohibited in the Old Town Core (OTC) District.
- Excessively bright colors or over-scaled letters as a means to attract attention are prohibited in the OTC District.
- Changeable electronic copy signs are prohibited in the OTC District.
Exempt Signs in Fate
- City traffic signals, signs, and similar devices.
- Official legal notices.
- Public warning signs, traffic control signs, traffic directional signs, public service signs indicating danger or aids to safety, or similar signs erected by the City or similar entity.
- Signs displayed within the interior of a building not visible from outside the building.
- Street numbers or addresses not exceeding 6 square feet.
- Signs or tablets cut into any masonry surface or constructed of bronze or other noncombustible materials of similar quality as determined by the Administrator.
- Sign facing replaced at the same location if there is no change in area, shape, lighting, or color.
- Replacement of letters on non-illuminated wall signs with identical letters (same area, shape, color) for which a permit for the original sign was obtained.
- Flags or emblems of a business or corporation when accompanied by both the national and state flags, with one business/corporate flag per development and not larger than accompanying national or state flags.
- Temporary political signs specifically authorized by V.T.C.A., Local Government Code § 216.903.
- Signs designated by official action of the City as having special historic or architectural significance are exempt from nonconforming sign removal or improvement requirements.
Sign Plan & Submission Notes for Fate
- A permit is required for all signs unless explicitly exempted.
- A site plan is required with the sign permit application, showing street frontage, property lines, easements, location of sign, relationship to points of ingress/egress, and relationship to other signs within 60 feet of the proposed sign.
- An elevation plan showing the proposed sign on the building with length of the elevation and any other signs on the elevation with dimensions is required with the sign permit application.
- Drawing of sign indicating materials, lighting, and other design features is required with the application.
- A Special Sign Permit (granted by City Council) is required for creative or innovative signs, unusual architectural or artistic value, or deviation from standard materials/design/methods, or for murals.
- Approval by the Administrator is required for any exceptions in the Old Town Core (OTC) district; if denied, applicant may request a Special Sign Permit.
- A Certificate of Occupancy is required (or an application submitted) prior to issuance of a sign permit for permanent signs.
- Changes in ownership require a new Certificate of Occupancy before sign permits for permanent signs are issued.
- If a sign is to be attached, altered, or relocated, a permit is required.
Source: municode municipal code