Questions? Call us at (262) 218-2915

Sign Regulations in Floresville, Texas

Floresville, Texas has specific sign regulations covering 22 sign types across 3 zoning districts. Regulated sign types include Temporary Sign, Billboard (expressways, interstate highways, toll roads), Billboard (arterial streets >75 sq ft). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 1, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Floresville, Texas

Sample Sign Requirements in Floresville

Sign TypeMax HeightMax AreaSetback
Pole Sign25 feet100 sq ftNot listed
Roof Sign10 feet above the portion of the roof over which erectedNot listedNot listed
Marquee Sign4 feetNot listedNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for FloresvilleFull Coverage

Sign Types Covered

22

  • Temporary Sign
  • Billboard (expressways, interstate highways, toll roads)
  • Billboard (arterial streets >75 sq ft)
  • Wall Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Floresville

City Website2 permit application links available

Frequently Asked Questions

In Floresville, the height limit for Pole Sign is 25 feet (Sec. 99-101). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Floresville require a permit. From the submission notes on this page: A plan checking fee equal to one-half of the sign permit fee shall be collected by the city at the time the permit application is submitted. Run a code check for an exact address to see the permit requirements for that zone.

Floresville's sign code covers 22 sign types, including Temporary Sign, Billboard (expressways, interstate highways, toll roads), Billboard (arterial streets >75 sq ft), and Wall Sign. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Governmental signs are exempt from sign permit requirements. The full list is on this page.

In Floresville, Subdivision Entrance Sign must be set back 5 ft from right-of-way, 10 ft from residential lot (Sec. 99-109). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Floresville's sign ordinance that cover digital, changing, or flashing signs: No permit shall issue for any portable sign if the top of the sign is more than eight feet above the ground, has a rotating beacon electric light, includes animation, or has exposed/missing bulbs. Electronic signs shall not be used as billboard signs. No off-premises electronic signs are permitted. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Floresville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Floresville, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Floresville, Texas Sign Rules at a Glance

Floresville, Texas regulates 22 sign types across 3 zoning districts. Pole Signs are capped at 25 feet tall and 100 sq ft (Sec. 99-101). Most commercial signs in Floresville require a permit.

Detailed Sign Ordinance Requirements for Floresville, Texas

Sign Rules by Zoning District in Floresville (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1440 feet480 sq ft (+20% for embellishments/cutouts)Not listed
Downtown Historic District848 inches45 sq ft (per sign)Not listed
Industrial Zoning Districts, Commercial Zoning Districts - (C, M, B)340 feet above ground level480 sq ft (+20% for embellishments/cutouts)Not listed

Zone-by-Zone Sign Requirements in Floresville

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Pole Sign25 feet100 sq ftNot listedNot listedNot listedNot permitted on sidewalks, streets, or public property.Not listedUnlockSec. 99-101
Portable Sign8 feet above the ground (including decorative trim)Not listedNot listed15 feet from private property lines.Not listedAt least 15 feet inside private property lines. Not allowed on sidewalks, streets, or public property.Not listedUnlockSec. 99-138, Sec. 99-151, Sec. 99-154, Sec. 99-155
Temporary SignNot listed48 sq ft (except cloth banners over streets and certain real estate signs)Not listedAt least 2 feet inside private property lines (except specific banner exceptions).Not listedAt least 2 ft inside private property lines (except for banner signs approved to project over street).Not listedUnlockSec. 99-62(5), Sec. 99-97
Digital Sign40 feet100 sq ftNot listed150 feet from property line of existing residence or residentially zoned district.1 per lotMonument sign only; at least 150 feet from existing residence or residential zoning districtNot listedUnlockSec. 99-108, Sec. 99-121
Billboard (expressways, interstate highways, toll roads)40 feet above ground level480 sq ft (+20% for embellishments/cutouts)Not listedEmplacement/setback per 99-118 (see: 750', 500', 300', 200', etc, as appropriate)Not listedNot allowed on public property without ordinance approval.Not listedUnlockSec. 99-116(a), Sec. 99-120(a)(1), Sec. 99-117(a)(1), Sec. 99-121
Billboard (arterial streets >75 sq ft)35 feet above street grade200 sq ft (+20% for embellishments/cutouts)Not listedEmplacement/setback per 99-118 (see: 750', 500', 300', 200', etc, as appropriate)Not listedNot allowed on public property without ordinance approval.Not listedUnlockSec. 99-116(b), Sec. 99-120(a)(2), Sec. 99-117(a)(2), Sec. 99-121
Billboard (arterial streets ≤75 sq ft)35 feet above street grade75 sq ft (+20% for embellishments/cutouts)Not listedEmplacement/setback per 99-118 (see: 750', 500', 300', 200', etc, as appropriate)Not listedNot allowed on public property without ordinance approval.Not listedUnlockSec. 99-116(b), Sec. 99-117(a)(2), Sec. 99-120
Subdivision Entrance Sign20 feet (structure); copy/letters max height 30 inchesNot listedNot listed5 ft from right-of-way, 10 ft from residential lot2 per entranceAt subdivision entrance, outside right-of-way and easements, outside sight triangle. Landscaped area equal to twice sign area required.Not listedUnlockSec. 99-109

Downtown Historic District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Sandwich Board Sign48 inchesNot listedNot listedNot listedNot listedOutside only when the business is open. Must be anchored/weighted. Minimum 4 feet sidewalk clearance.Not listedUnlockSec. 99-167(6)
Awning/Canopy SignNot listedNot listedNot listedNot listedNot listedOn awning or canopyNot listedUnlockSec. 99-167(7), (1)
Primary SignNot listed45 sq ft (per sign)Not listedNot listed1 per street facade; max 2 facadesAffixed to one facade per street. Buildings with rear public entrances not facing a street may also have one sign oriented to the rear.Not listedUnlockSec. 99-167(2,11), Sec. 99-169(1,2,3), Sec. 99-170(1)
Secondary SignNot listedNot listedNot listedNot listed3 per businessNot listedNot listedUnlockSec. 99-169(4), Sec. 99-170(1)
Permanent Window Sign12 inches (character height)Not listedNot listedNot listedNot listedOn glass windowNot listedUnlockSec. 99-167(8), Sec. 99-170(1)
Temporary SignNot listed30 sq ft (for banners); temporary window signs same as permanentNot listedNot listedNot listedOn window, exterior banners, pennant flagsNot listedUnlockSec. 99-168
Electronic Window SignNot listed6 sq ft (per sign)Not listedNot listed2 per businessInside window display onlyNot listedUnlockSec. 99-174(b,d,e)
MuralNot listedNot listedNot listedNot listedNot listedExterior building surfaceNot listedUnlockSec. 99-173

Industrial Zoning Districts, Commercial Zoning Districts - (C, M, B)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Billboard (expressways, interstate highways, toll roads)40 feet above ground level480 sq ft (+20% for embellishments/cutouts)Not listedSee 99-118: min 30 ft from property line for >75 sq ft; 15 ft from overpass or bridge railing, various radii from parks, facilities, historic sites.Not listedNot listedNot listedUnlockSec. 99-116(a), Sec. 99-120(a)(1), Sec. 99-117(a)(1), Sec. 99-121, Sec. 99-126
Billboard (arterial streets >75 sq ft)35 feet above street grade200 sq ft (+20% for embellishments/cutouts)Not listedSee 99-118: min 30 ft from property line for >75 sq ft; 15 ft from overpass or bridge railing, various radii from parks, facilities, historic sites.Not listedNot listedNot listedUnlockSec. 99-116(b), Sec. 99-120(a)(2), Sec. 99-117(a)(2), Sec. 99-121, Sec. 99-126
Billboard (arterial streets 075 sq ft)35 feet above street grade75 sq ft (+20% for embellishments/cutouts)Not listedSee 99-118: min 30 ft from property line for >75 sq ft; 15 ft from overpass or bridge railing, various radii from parks, facilities, historic sites.Not listedNot listedNot listedUnlockSec. 99-116(b), Sec. 99-117(a)(2), Sec. 99-120, Sec. 99-121, Sec. 99-126

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Floresville with a free PermitPal account.

Run a free code check

Prohibited Signs in Floresville

  • No person shall affix a sign or bill to any public building, property or thing belonging to the city or to any other public entity without the approval of that authority.
  • No person shall affix a sign or bill to any private property without having first obtained the written permission of the owner or agent.
  • Any sign erected, altered, used or maintained in violation of this chapter shall constitute a public nuisance and is subject to abatement.
  • It shall be unlawful for any person to erect or substantially alter any billboard or commercial sign without obtaining the proper permit from the building official, unless specifically exempted.
  • It shall be unlawful for any sign contractor to do or have done any construction or repair of any sign or billboard for which a permit is required without first obtaining a license to do so from the city.
  • No pole, post or standard used to support any sign or floodlight shall be set in or upon any sidewalk, street or other public property.
  • No sign shall be erected, maintained or painted upon any tree, rock or other natural feature.
  • Any permit issued in violation of any section of this chapter shall be absolutely void, and no rights whatever shall be accrued.
  • No portable sign, whether electric or nonelectric, shall be placed on any sidewalk, street or other public thoroughfare or public property.
  • No off-premises portable sign, whether electric or nonelectric, shall be permitted in the city.
  • No permit shall issue for any portable sign if the top of the sign is more than eight feet above the ground, has a rotating beacon electric light, includes animation, or has exposed/missing bulbs.
  • No sign shall be erected on or over public property in a manner which interferes with any fire hydrant, traffic light, fire alarm box or streetlight.
  • All signs governed by this chapter shall be situated in a manner which does not interfere with or obstruct windows, doors or other means of exit from the building; no signs shall be supported on or attached to any fire escape, door or window casing.
  • The use of staples, wires and wood plugs in erecting signs is prohibited.
  • It shall be unlawful for any person whose license has been suspended or revoked by the council to engage in or do sign work for which a permit is required under this chapter.
  • It shall be unlawful for anyone licensed under this chapter to obtain a permit on behalf of or for the benefit of any person whose business activities are such that he would need a license to obtain a permit.
  • No building may have signage on more than two facades.
  • Permanent signs shall not be constructed of core-plast or banner material, except existing signs made from such materials may remain but cannot be altered or replaced except by compliant signs and materials.
  • Advertising on planters, trash receptacles, park benches or other street amenities is not allowed (except for donor plaques).
  • Electronic signs shall not be used as billboard signs.
  • No billboard or any part thereof shall be located on or above any public property or street right-of-way, unless approved by city ordinance.
  • It shall be considered an offense to erect, construct or allow land to be used for billboard or portable sign use in violation of the requirements and standards of this division.
  • No off-premises electronic signs are permitted.
  • Off-premises real estate signs shall not be placed in state or local rights-of-way.

Exempt Signs in Floresville

  • Advertising benches (benches providing seating to the public which may bear advertising) are not regulated by this chapter.
  • Official announcements or signs of government are excluded from the definition of 'sign' in this chapter.
  • National or state flags, nonelectric window displays, graffiti, and athletic scoreboards are excluded from the definition of 'sign' in this chapter.
  • Governmental signs are exempt from sign permit requirements.
  • Signs not exceeding one square foot of facing attached to a residence or apartment building, stating only the name and occupation of the occupant, are exempt from permit requirements.
  • Signs not exceeding 15 square feet of facing, composed of durable material, situated wholly upon private property, securely affixed, and having a frame or trim not more than three inches wide are exempt from permit requirements (note: does not apply in a downtown historic district).
  • Real estate signs not exceeding 32 square feet used solely to advertise the sale of the premises upon which the sign is located are exempt from permit requirements.
  • Off-premises real estate or home building signage not exceeding four square feet and four feet in height is allowed on weekends with property owner approval (with restrictions).
  • Temporary signs, other than cloth banner signs, not exceeding 48 square feet are exempt from permit requirements.

Sign Plan & Submission Notes for Floresville

  • A plan checking fee equal to one-half of the sign permit fee shall be collected by the city at the time the permit application is submitted.
  • The application for commercial and billboard sign permits must contain all information, drawings, and specifications necessary to inform the building official of the type, size, shape, location, construction and materials of the proposed sign and the building structure or premises upon which it is to be placed.
  • When applying for a billboard permit, the applicant must include detailed site, engineering, and location information at the time of permit application (including engineer's certification).
  • Structural plans with calculations performed and sealed by a licensed professional engineer for subdivision identification signs must be provided to planning and codes department for record keeping.
  • As-builts are to be submitted at final review for all structures designed, engineered and built as part of the subdivision entrance sign, with a letter of concurrence by a licensed professional engineer.
  • Permit, inspection and variance fees shall be the same as provided for elsewhere in the chapter.
  • All requests for a variance from the historic sign requirements must be submitted in writing to the Code Compliance director along with a permit application. If denied, appeals escalate to the zoning board of adjustment.
  • Murals painted on the exterior of any building facade must first go through the permitting procedure prescribed herein.
  • With the exception of real estate signs, temporary signs, and permanent signage with an area of 15 square feet or less, it is unlawful to erect or substantially alter any signage in any historic district without the proper permit and/or variance.
  • Subdivision entrance sign structures that do not contain copy/letters used for the name of the subdivision will require separate building permits.

Source: other municipal code