Sign Regulations in Ingram, Texas
Ingram, Texas has specific sign regulations covering 5 sign types across 1 zoning districts. Regulated sign types include Banner Sign, Canopy Sign, Community Service Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 9, 2025
Sign Regulation Overview for Ingram, Texas
Sample Sign Requirements in Ingram
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Banner Sign | — | 16 square feet | — |
| Canopy Sign | 3 feet above the top of the canopy | — | — |
| Community Service Sign | 10 feet | 32 square feet | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
5
- Banner Sign
- Canopy Sign
- Community Service Sign
- Changeable Electronic Variable Message Sign (CEVMS)
- +1 more types
Zoning Districts
1
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Texas
Frequently Asked Questions
Sign height limits in Ingram vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Ingram, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Ingram, regulated sign types include Banner Sign, Canopy Sign, Community Service Sign, Changeable Electronic Variable Message Sign (CEVMS), and 1 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Ingram vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Ingram are regulated with specific requirements for brightness, animation, and message duration. Ingram has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Ingram Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Ingram, Texas sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Ingram, Texas Sign Rules at a Glance
Ingram, Texas regulates 5 sign types across 1 zoning district. Community Service Signs in the General Regulations For All Zones zoning district are capped at 10 feet tall and 32 square feet (Sec. § 3.07.001 Community service sign (1)-(5)). Most commercial signs in Ingram require a permit.
Detailed Sign Ordinance Requirements for Ingram, Texas
Sign Rules by Zoning District in Ingram (1 zone)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 5 | 10 feet | 32 square feet | — |
Zone-by-Zone Sign Requirements in Ingram
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Banner Sign | — | 16 square feet | — | — | — | — | — | Unlock | § 3.07.001 Banner sign (1)-(3) |
| Canopy Sign | 3 feet above the top of the canopy | — | Width of the canopy | — | — | Attached to a canopy | — | Unlock | § 3.07.001 Canopy sign (1)-(5) |
| Community Service Sign | 10 feet | 32 square feet | — | — | — | Public right-of-way | — | Unlock | § 3.07.001 Community service sign (1)-(5) |
| Changeable Electronic Variable Message Sign (CEVMS) | — | 32 square feet | — | — | — | Wall or window sign instead of freestanding | — | Unlock | § 3.07.013 (1)-(8) |
| Wall Sign | 3 feet above the building wall | — | — | — | — | Attached to the outside wall of a building | — | Unlock | § 3.07.001 Wall sign |
Illumination rules, size formulas, and permit requirements for every sign type in Ingram are available with a free PermitPal account.
Start freeProhibited Signs in Ingram
- Any signs and supports, other than those signs and supports required by governmental authority, or for which a street use license has been issued, and which are located on the public right-of-way, including on public sidewalks, streets, alleys and parkways.
- Signs or parts of signs that revolve, rotate, whirl, spin or are wind-blown or otherwise make use of motion to attract attention.
- No sign that is illuminated by or contains flashing, intermittent, rotating, or moving lights.
- Any sign that resembles an official traffic sign or signal or which bears the words 'Stop,' 'Go Slow,' 'Caution,' 'Danger,' 'Warning,' or similar words.
- Any sign that emits sound, odor or visible matter, which serves as a distraction to persons within the public right-of-way.
- No sign other than 'Entrance,' 'Exit,' or directional fire escape notices shall be placed in any form, shape, or manner on any fire escape, or door or window giving access to a fire escape.
- Abandoned or damaged signs.
- Unattached signs.
- Signs placed upon motor vehicles or trailers and used as stationary advertising devices.
- Snipe signs.
- Political signs with a surface area of thirty-six (36) square feet or greater.
- Off-premises signs.
Exempt Signs in Ingram
- Non-illuminated signs advertising the sale, lease or rental of the premises upon which the sign is located.
- Professional nameplates or 'shingle signs.'
- Signs denoting the name and address of the occupants of the premises, not exceeding four (4) square feet in size.
- Non-illuminated temporary construction site signs, for a period not exceeding the completion of the construction project and not exceeding twenty-four square feet.
- Governmental signs.
- One non-illuminated sign per street frontage of a building that is under construction or structural alteration or repair announcing the character of the building enterprise or the purpose for which the building is intended, including names of architects, engineers, contractors, developers, financiers, and others, not exceeding twenty-four square feet.
- Community service signs, not placed on the public right-of-way, including any portable or wheeled community service sign.
- Official flags of governmental jurisdictions, and flags carrying the emblems of business firms on the premises where the flag is displayed.
- Commemorative plaques placed by governmental or civic organizations, or integral signs.
- Signs approved in a planned unit development.
- Rearrangement/replacement of letters, numbers, characters, or pictures on existing signs, provided the sign is not enlarged and the sign is not illuminated in violation of this article.
- Pennants, ribbons, streamers, spinners, or similar moving or wind-blown items or balloons, provided such shall be removed after a period of seven days.
Sign Plan & Submission Notes for Ingram
- No authorized sign shall be erected, altered, repaired, or relocated within the city limits without first obtaining a permit from the city council or other designated authority.
- All applications for permits for all signs shall be accompanied by such drawing or descriptions as are necessary to fully advise the city council or other designated authority as to location, construction, and details.